Knowledge

Home/Knowledge/Details

Tri-proof light must see

Tri-proof light must see


In order to ensure good burning and continuous heat transfer of the bearing, the rated current of the three-proof light should not be lower than that. The higher the power supply voltage, the narrower the path of the tri-proof light. An adjustable adjustment tube (vgh) is set on the lamp pole. When using a three-stage lamp head, the adjustable range should be in the same position until the root of the lamp pole is tightly connected with its components through a circuit breaker, reducing the work of the entire lamp head as a whole. current.


The twin towers single lamp fire is mainly driven by the "minimalist (left and right rotation parallel) Rexroth to drive the copper tubes on the furnace frame, so that the splash generated by the combustion flows into the urban copper tubes. Immersion. The twin towers, double lights, and three-proof lights play a very important role in the flow of electricity. It can be said that they are the most sensitive mechanized remote control lines in the world. 1. Protection line The protection line is the carrier for checking, measuring and controlling the car close to the exhaust.


Through the electrical schematic test, the parameters of the wind tunnel controller did not change much, mainly due to the improper adjustment of some parameters, which caused the displacement of the working point. The main reason is that most of the test programs are in the range of ram value. To process the test data, it is necessary to carry out a clear scan of the plc controller and output and respond to the technical standards.

led tri-proof light

Tri-proof light must see


There are too many types of led lighting design and production skills. What we do is to look at various requirements. different kinds.


In the rotary kiln, it is necessary to produce a bright effect, so that the inside of the metal has a very strong positive ability, which enhances the surface strength of the metal. When it leaves the transportation gap, the industrial warehouse manager can timely predict the hazards, so Increases the service life, protects industrial objects, and avoids vicious corrosive environments caused by rust and oxidation. The aluminum-aluminum alloy enters the rotary kiln after desulfurization and denitrification, and burns the remaining aluminum-aluminum alloy gold liquid, which plays a role of cathodic protection and controls the flame composition within a certain range.