Knowledge

Home/Knowledge/Details

Types of LED strips

According to the type of SMD lamp beads:


LED strips are generally composed of PCB substrates (flexible or rigid boards), LED lamp beads, and other accessories. The core part is the LED lamp beads, which are generally dominated by SMD chip lamp beads.


Conventional models can be roughly divided into the following 6 types:


(1) SMD5050 led strip


5050 is the earliest form of lamp bead package that appeared. The starting power of Z is very low, generally 0.1-0.2W. However, with the development of technology, there are already 1W-3W SMD5050 light strips.


Moreover, because the 5050 lamp beads are large in size and have many color changes, they can be made into RGB, RGB+W, RGB+CCT; there are also many kinds of control ICs that are also encapsulated in the lamp beads. Generally, the 5050 lamp beads have 6 solder joints. If the control IC is added, some may have up to 8 pads.


(2) SMD3528 led strip


3528 is second only to 5050 and is the elder brother of 3014 and 2835. Its volume is larger than that of 2835, and its power is similar to that of 3014. With the widespread use of 2835, the cost-effectiveness of 3528 lamp beads is no longer advantageous, and it has gradually withdrawn from the market.


(3) SMD3014 led strip


3014 appeared earlier than 2835, the power is small, generally only 0.1W, and the volume and luminous surface are also small. It has been used in the backlight for the earliest time and has the advantage of small size. It is not as good as 2835 in terms of brightness and luminous surface when used on light strips.


(4) SMD2835 led strip


In addition to 5050, 2835 is the most widely used and the most mature package form. Power from 0.1W to 1W, widely used in various indoor lighting fixtures, led strips, outdoor lighting and so on.


The 2835 package generally has only two pads, positive and negative, and is mostly used with single-color temperature lamp beads. Generally can not do dual color temperature, or RGB. However, it has stable performance, good heat dissipation and high luminous efficiency, and is the most common type of light strip.


(5) SMD5730/5630 led strip


The 5730 or the similar 5630 is the same package type. This type of light-emitting surface is large, and the power is also large, generally 0.5-1W. If it is used on a light strip, the power of a single lamp bead is too large, and the power and brightness of the entire light strip will be too high. Of course, the cost is also higher. Therefore, it is generally not used much, and it is commonly used on high-voltage 220v light strips.




(6) COB light strip




COB means chips on board, which means that the light-emitting chips are directly attached to the PCB, without the need for gold wires and brackets. A layer of phosphor powder is then potted on the surface. This is a relatively new light strip product, which has the advantages of high brightness, uniform light-emitting strips, and no graininess. Moreover, compared with ordinary SMD light strips, it is more resistant to tension. With the development and popularization of the application and lighting market, COB light strips will be the mainstream of future LED light strips.

Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED  manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.