Knowledge

Home/Knowledge/Details

Viewpoint for installing led clean light panel light as indoor lighting

1. Before installing LED panel lights and LED purification lights (clean lights) indoors, the light illumination level and spatial brightness distribution of each subdivision area must be determined.


       Different places have different illuminance requirements. For example, in classrooms, libraries, operating rooms and other places where eyes are used for a long time, there are certain requirements for lighting illuminance. Therefore, planning must be made in advance to calculate the amount of LED clean panel lights.


2. According to the characteristics and functions of the building, install LED panel lights and purification lights in different areas. Reasonable layout of LED purification lamps, in the case of using as few LED purification lamps as possible, maximize the illuminance of space lighting, so as to save the purchase cost of LED lamps, and also save more electricity.


3. Indoor lighting choose different lighting fixtures according to your needs. For example, in clean places such as hospitals, clean rooms, and clean rooms, LED clean lights (purification lights) are used; in school classroom lighting, the color rendering index of the light source is required to be greater than 80, and the LED clean panel lights produced by regular clean light manufacturers are basically all can meet this requirement.


LED purification light clean panel light conference hall lighting fixtures


4. Select LED purification lamps according to lighting needs, compare and optimize the layout of purification lamps, and comprehensively achieve the values recommended in the standard.


       Although the price of the LED purification lamp made of PS light guide plate is cheap, it has the risk of turning yellow. After one year of use, the surface of the LED purification lamp will show signs of yellowing, and some inferior products will turn yellow and darken even after a few months. , seriously affecting the service life of the purification lamp. The LED purification lamp made of PMMA light guide plate does not have this concern.


5. Energy saving requirements for LED panel lights (clean lights):


       First of all, the selection of high-efficiency and energy-saving LED panel lights must use high-efficiency and energy-saving LED chips.


       Secondly, configure LED panel lights and special drive power for purification lamps, which can overcome the stroboscopic problem of LED purification panel lights, and also improve the light source efficiency of LED lamp beads.


LED purification light, clean light, panel light, school classroom lighting


6. The coordination between LED panel lights (purification lights) and the environment should be consistent.


       (1) When installing LED panel lights and purification lamps, it is necessary to coordinate the light and color of the lighting place to achieve the purpose of unity. For example: the coordination of school classrooms and aisles is consistent with the overall decoration characteristics;


       (2) The coordination of indoor illumination of LED panel lights (clean lights) should be the same or similar. For example, the lighting in the classrooms and the aisles of the school is coordinated, and it is best not to have obvious bright and dark areas. In adjacent areas with different functions, the illuminance change of the LED panel light should not exceed 5:1.


7. If LED clean lights and LED panels are installed in school classrooms, the influence of teaching projectors must be considered. Therefore, in school classrooms, lighting can consider installing a part of CCT dimming panel lights. The dimming panel light is actually replacing the ordinary power switch with a dimming power supply to turn on the light to achieve the purpose of controlling the brightness of the light source.

Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED  manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.