What are the installation methods of LED panel lights
1. Embedded
Install the sheet metal groove on the ceiling first, and then fix a few outwardly protruding brackets on the back of the LED panel light, and then put the panel light in so that the bracket matches the sheet metal groove on the ceiling, and then it can be fixed on the ceiling. However, because the thickness of various ceilings is different, it is necessary to adjust the height between the lamp surface and the bracket, otherwise it will cause the phenomenon that the LED panel light is higher or lower than the ceiling surface after installation.
2. Wire hanging type
First, fix the hanging wire installation parts on the ceiling, and lock the screws (the hanging wire has been installed before leaving the factory.) The hanging wire is vertically down, and the component is suspended on the back of the LED panel light. Easy to install and save trouble. Consumers must pay attention to inquiries to understand whether the suspension components are standard or optional accessories from the manufacturer.
3. The bracket is fixed
First, drill a few screw holes in the ceiling, and then install the sliding-in ceiling frame of the LED panel light on the ceiling, and fix it on three sides. Then slide the panel light into the fixed slide-in mounting frame, and then screw on the fourth side to fix the frame. Convenient, simple and time-saving.
