1. Do not turn on the LED light strip when the whole roll of LED flexible light strip is not detached from the package or piled up in a ball.
2. When connecting the power supply or connecting two light strips in series, first bend the head of the colorful light to the left and right, so that the wires in the light strip are exposed by about 2-3mm. connected to avoid short circuits.
3. Only LED strips with the same specifications and voltage can be connected in series, and the total length of the series connection cannot exceed the maximum permitted length.
4. When the LED flexible light strips are connected in series with each other, each time a section is connected, that is, the pilot section is lit, so as to find out in time whether the positive and negative poles are connected incorrectly and whether the light emission direction of each section of the light strip is consistent.
5. When cutting the led strip according to the installation length on site, the strip can only be cut at the place marked with scissors, otherwise one of the units will not light up. Generally, the length of each unit is 1.5-2 meters.
6. The end of the light strip must be covered with a PVC tail plug, and after it is fastened with an entrainment tape, the surrounding area of the interface is sealed with neutral glass glue to ensure safety.
7. Because the led light bar has unidirectional conductivity, if you use a power cord with an AC/DC converter, you should conduct a power-on test after completing the power supply connection to confirm that the positive and negative poles are correctly connected before putting it into use.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: https://www.benweilight.com/.
