What are the reasons why the outdoor waterproof light strip cannot be lit?
1. The led silicone lamp has less solder, and the solder joints are easy to fall off.
2. The solder joints of LED silicone light strips have virtual soldering phenomenon. The vibration during transportation caused the solder joints to fall off, and the light strip did not light up.
3. The LED silicone light strip cannot be twisted during the installation process. If it is twisted, the solder joints of the LED silicone light strip will fall off and not light up.
4. When installing the LED silicone light strip, excessive extrusion of the product will cause damage to the LED silicone light strip chip or deformation of the solder joints.
5. The welding quality of LED silicone light strips is poor, and the solder joints of LED silicone light strips are easy to crack and fall off when bent.
6. When the LED silicone light strip is installed, the bending angle is too large, which causes the solder joints of the LED silicone light strip to separate from the copper foil, resulting in no light.
7. The packaging and protection of the LED silicone light strip is not perfect, which causes the lamp beads to be damaged by impact during transportation.
8. The solder mask layer of the LED silicone lamp with circuit board is too thick, and the solder and the circuit board cannot be combined during welding, which is also a phenomenon of virtual welding.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web:
https://www.benweilight.com/.




