What are the reasons why the solar street light does not turn on?
What should I do if the solar street light suddenly doesn't turn on? There are several reasons why solar street lights don’t turn on, let’s take a look at them:
1. The LED light source is damaged
This is a relatively common reason. The LED light source is damaged due to natural or man-made causes, which causes the solar street lamp system to fail to work, not to turn on at times, and to flicker.
Solution: Repair the LED light source or replace the LED light source.
Second, the solar panel is damaged
In fact, this situation is not much, because solar panels generally have a long service life, but any product is not perfect. Maybe the solar street light system can't work or the working time is not enough.
Solution: Only replace solar panels.
3. The positive and negative poles of the solar cell are connected reversely
[First confirm whether the positive and negative poles of the battery board are connected reversely]
The solar street light system will only turn on once after installation, and it will never turn on again when the battery is used up.
Solution: Exchange the positive and negative poles of the solar panel.
Fourth, the constant current source is damaged
[Exclude the system from restarting the bulb to work normally]
The solar street light system cannot work, and the LED light will not light up or flicker.
Solution: Repair the constant current source or directly replace the constant current source.
Five, controller error
[There is no button on the control panel, you need to add a handheld terminal or use a data cable to connect to the computer and use the software to reset, please help from the supplier]
The solar street light system can't work normally, the LED light is on and off, the time is not enough, it is on during the day, and it is not on at night or it is on all the time.
Solution: The settings, programs, and hardware of the controller need to be overhauled, reset the controller, and directly replace the controller.
Sixth, the line is aging or the line is disconnected
The solar street light system cannot work normally, and the LED will not light up or flicker.
Solution: Reconnect the wires or replace the wires.
Seven, man-made damage to the hardware of the solar street light system
This situation is generally serious, and the solar street light system cannot work normally.
Solution: In this case, the damaged hardware needs to be inspected and repaired, and then repaired or replaced by the damaged hardware.
Benwei Solar Street Lights Outdoor Lamp
Product Features:
>LED light, solar panel, lithium battery and controller,all in one compact design.
>No wiring,100% solar powered ,easy to install and ship.
>Built-in infrared sensor, can adjust the light output automatically(time control + light sensor control+ motion sensor control).
>Rust-proof, dustproof and waterproof IP65.
>5 years warranty.
