Knowledge

Home/Knowledge/Details

What is the role of the nameplate on the LED explosion-proof light?

A explosion-proof mark.

B basic signs: including product name, model, manufacturer's name, registered trademark, date of manufacture, etc.

C performance safety signs: including rated voltage, current, nominal frequency, light source power and quantity, allowable ambient temperature (the range is only -20 ~ +40 ℃ can not be marked), specific applicable environmental signs (such as only applicable to a certain A product of an explosive gas mixture must be marked with the name or molecular formula of the flammable gas), the classification mark of the lamp (such as "number"), etc.

D Explosion-proof certificate number, which proves that the product has passed the official inspection of the explosion-proof inspection station. Some products have an "x" symbol after the explosion-proof certificate number, which indicates that this kind of product can only be used under certain special safe use conditions.

D Additional notes. In addition to the above marks, detailed instructions necessary to ensure correct installation, use and maintenance shall be given on the luminaire, on the built-in ballast or in the manufacturer's product manual provided with the luminaire. E.g:

A The allowable working position of explosion-proof lamps, some explosion-proof lamps are only allowed to be installed and used in a certain position or a certain angle range, this is because the change of the working position, the heat distribution and the maximum surface temperature of the explosion-proof lamps and lanterns will change. Therefore, the main reason for restricting the working position of explosion-proof lamps is to control the high surface temperature, so as not to exceed the temperature group marked by the explosion-proof lamps themselves, resulting in dangerous temperatures. In addition, the change of working position will also have an impact on the life and performance of some light sources, as well as on the insulating materials, electrical components, insulation properties and lifespan of lamps and lanterns. Therefore, explosion-proof lamps with limited installation and use positions must be clearly stated.

B In order to reduce the maximum surface temperature of explosion-proof lamps and the grouping level of product temperature, the design and selection of explosion-proof lamps with special specifications of light sources must indicate the name, model, shape and size of the bulb and the manufacturer. If it is not specified, when users switch to other bulbs of the same power, the maximum surface temperature of explosion-proof lamps may exceed the ignition temperature of the explosive gas mixture in the operating environment, posing an explosion hazard.

C Under the most unfavorable conditions of normal operation, if the insulation material of the power cable or wire is subjected to the maximum temperature of 80t in the lamp, it should be marked so that the corresponding cables and wires can be selected. When there are special requirements for incoming cables or wires, the specifications, models and applicable temperatures should be indicated.

D Lamps with batteries must state the type, nominal voltage and nominal capacity of the batteries to avoid loss and danger.

E For explosion-proof lamps with concentrated light and similar performance, a short distance from the illuminated object should be indicated to prevent the illuminated object from being scorched and burned.

F Ballast coil rated maximum operating temperature tω(C), capacitor rated maximum operating temperature tc(C), wiring diagram⑤


Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.