What material is used for led floor tile lights?
There are generally two ways to make the LED floor tile light shine. One is polishing by waxing, which requires the use of special floor tile wax, both liquid and solid. Liquids generally do not require mechanical polishing, and the operation is relatively simple and fast. Solids require mechanical polishing, and the brightness is also relatively high. Another method is to do surface crystallization treatment. Simply put, the floor tile crystallization agent produces a chemical reaction through heat generation through mechanical grinding to form a transparent crystalline layer on the surface of the floor tile, thereby increasing the brightness and surface wear resistance of the floor tile. Led floor tile lights are made of aluminum, aluminum alloy, iron, ABS, plastic, acrylic, glass, etc. Generally speaking, aluminum is better. The aluminum substrate of the led bulb is a metal-based copper clad laminate with good heat dissipation function. Generally, a single-sided panel consists of a three-layer structure, which are a circuit layer (copper foil), an insulating layer and a metal base layer. For high-end use, there are also double-sided designs with a structure of circuit layer, insulating layer, aluminum base, insulating layer, and circuit layer. Very few applications are multi-layer boards, which can be made by laminating ordinary multi-layer boards with insulating layers and aluminum bases. The led aluminum substrate is PCB, which is also the meaning of printed circuit board, but the material of the circuit board is aluminum alloy. The substrate can conduct heat quickly, and the circuit boards for other equipment or electrical appliances are still glass fiber boards.
Since the data signal has extremely high requirements for waterproofing, the design of the waterproof connector is also very particular. The well-designed screw-lock waterproof structure is easy to operate and has reliable performance. High elasticity, anti-aging and other characteristics, the metal plug-in terminals are made of copper and gold-plated on the surface, which has strong ability, and ensures firm contact and excellent electrical conductivity. Special agent is added to the waterproof joint to improve moisture resistance and water resistance again.
The led floor tile lamp series has the advantages of environmental protection, energy saving, safety, etc., and is an important development direction of energy saving and environmental protection advocated. It can achieve single-color always-on, single-color jump, double-color change, seven-color jump, seven-color gradient, tracking, fast sensing, sensitive, high hardness, uniform thickness, good gloss, strong light transmission and other effects. It is non-deformable, fireproof, waterproof, anti-aging, non-radiation and anti-penetration, oil-resistant, dirt-resistant and corrosion-resistant. The light source adopts high-brightness LED light-emitting diode, which has the characteristics of low power consumption (such as 4-10 W per 300*300 floor tile), long life (100,000 hours of LED life), impact resistance and high reliability. With the special LED controller, it can realize various dynamic effects such as colorful jumping, gradient, chasing, flowing water, expansion, compression and so on. Completely sealed with good water resistance, can reach IP68, high strength, impact resistance, acid resistance, alkali resistance, explosion-proof, beautiful appearance, long life and other advantages. It can be bent at will according to the needs of customers, seamless bonding, easy to install and not easy to break. It is a green building material!
According to the specific ground pavement structure, the light outlet area of the lamp can be large or small. The embedded stone lamps and floor tile lamps are in line with the paved stone in the way of trimming, so as to achieve the effect of harmony and unity between the environment and the light source. After the floor tile lights are laid, it is very beautiful, changing the monotony of the traditional ground and adding a beautiful landscape to the city.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
