What problems should be paid attention to in the installation of led projection lamps
There are two kinds of led projection lamp products, one is the integrated chip and lamp, which is what we often see; the other is the spotlight lamp holder plus bulb, which is used to exchange the existing spotlight. The former is usually a 90mm socket, and the latter is usually a 70mm socket. Pay attention to the lamp socket, not the lamp. The led projection lamp product is projected and developed by the lamp film, which belongs to a kind of spotlight, but different from the spotlight, the projection lamp product can project the picture, and the single spotlight can only play the role of lighting.
So what problems should we pay attention to when we purchase led projection lamps and install them later
When installing led projection lamps, the first thing we need to pay attention to is that we need to confirm the purpose first. Are we sure whether I want to install new lamps, turn on the lamp socket, or exchange the existing spotlights?
1. Consider the number and brightness of lights. LEDs can't measure brightness by wattage, because of the same wattage, high-quality LED chips are much brighter than poor ones.
2. Consider the color temperature, which is the color, usually 3000k-6500k. This radish cabbage has its own love.
3. Consider the size of the lamp, ordinary 90mm and 70mm, there are also larger ones.
4. Consider whether you want to be dimmable or not. It is very troublesome here. Be sure to choose a matching dimmer. Be sure to test first, not all lights and all dimmers are matched.
5. Consider the lighting angle of the lamp. Ordinary living rooms need wide-angle ones, and kitchen counters and bathrooms need narrow-angle ones.
6. Consider the planning of lights, and avoid the position of beams. It is recommended to choose ultra-thin lamps to reduce the probability of conflict with the beam.
7. Try to choose a lamp that can be covered by thermal insulation cotton, but do not cover it in practice. Like computer chips, led projection lamps require good heat dissipation.
8. If a new light is installed, the 90mm independent driver with a plug. It is recommended to use clipsal 413qc socket. The cost is 4 dollars more expensive, but the installation speed of the electrician will be much faster, and it can be replaced by myself in the future (legal)
In a word, when installing LED projection lamps, you should pay attention to the installation according to the usage conditions of your own site. For example, the height of LED projection lamps installed outdoors should not be too low. Whether it is safety or performance, LED projection lamps used outdoors should not be installed at a high height. In addition, considering the convenience of use, for LED projection lamp products that need to be switched on and off frequently, there must be a master switch to stop the control, so that it can be used later.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
