Where are the tri-proof lights used? How to perform maintenance
Tri-proof lights are widely used in our life, so do you know where the pantry is used? How should we maintain it? Let me introduce it to you below!
1. Where are the three-proof lights used?
The tri-proof light is mainly suitable for use in humid environments such as highway tunnels, food factories, pharmaceutical factories, hospitals, etc., especially in environments with large dust, which plays a great role in safe production.
2. Maintenance matters:
1. The dust and dirt on the shell and tube of the three-proof lamp should be cleaned regularly, and pay attention to the water mist in the lamp cavity of the three-proof lamp used in a humid environment, which should be removed in time to avoid rust damage or damage over time. The phenomenon of leakage short circuit.
2. Check whether the transparent parts of the lamps are impacted by foreign objects, and whether the protective net is loose, desoldered, corroded, etc. If there is, stop using it and repair and replace it in time.
Three anti-light
3. The damage of the light source of the three-proof lamp should be replaced in time to avoid the long-term abnormal condition of the electrical components such as the ballast due to the inability of the light source to start.
4. When opening the lampshade of the three-proof lamp, the cover should be opened after cutting off the power supply according to the requirements of the warning sign. After opening the cover, check whether the flameproof joint surface of the three-proof lamp is intact, whether the rubber seal is changed, whether the wire insulation layer is green and carbonized, and whether the insulating parts and electrical components have deformation and scorch marks. If there is such a problem, it should be repaired and replaced in time.
5. Try not to switch on and off frequently when using lamps, because the current through the filament is greater than the current during normal operation at the moment when the lamp is frequently started, which makes the temperature of the filament rise sharply and accelerates the sublimation, which will greatly reduce its service life. Therefore, Turn on and off lights as much as possible.
The above is an introduction to where the tri-proof light is used and the maintenance method. I believe that through the description of this article, you can gain something from the tri-proof light. I hope the above content can help you. In addition, if you want to know more relevant information, you can pay more attention to our website dynamics.
