Knowledge

Home/Knowledge/Details

Where are the tri-proof lights used? How to perform maintenance

Where are the tri-proof lights used? How to perform maintenance

1. Where are the three anti-lights used?


The tri-proof light is mainly suitable for use in humid environments such as highway tunnels, food factories, pharmaceutical factories, hospitals, etc., especially in environments with large dust, which plays a great role in safe production.


2. Maintenance matters:


1. The dust and dirt on the shell and tube of the three-proof lamp should be cleaned regularly, and pay attention to the water mist in the lamp cavity of the three-proof lamp used in a humid environment, which should be removed in time to avoid rust damage or damage over time. The phenomenon of leakage short circuit.


2. Check whether the transparent parts of the lamps are impacted by foreign objects, and whether the protective net is loose, desoldered, corroded, etc. If there is, stop using it and repair and replace it in time.


三防灯

      3. The damage of the light source of the three-proof lamp should be replaced in time to avoid the long-term abnormal condition of the electrical components such as the ballast due to the failure of the light source to start.


4. When opening the lampshade of the three-proof lamp, the cover should be opened after cutting off the power supply according to the requirements of the warning sign. After opening the cover, check whether the flameproof joint surface of the three-proof lamp is intact, whether the rubber seal is changed, whether the wire insulation layer is green and carbonized, and whether the insulating parts and electrical components have deformation and scorch marks. If there is such a problem, it should be repaired and replaced in time.


5. Try not to switch on and off frequently when using lamps, because the current through the filament is greater than the current during normal operation at the moment when the lamps are frequently started, causing the temperature of the filament to rise sharply and accelerate the sublimation, which will greatly reduce its service life. Therefore, Turn on and off lights as much as possible.

Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED  manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.