Which lamps are generally used in hotels? How to buy hotel lamps?
The hotel is to provide guests with safe, comfortable and warm lodging and eating places. Generally, hotels need to be carefully designed, and the layout design of lamps is also a very important part. So which lamps are generally used in hotels? How to buy hotel lamps? Don't worry, BENWEI will explain it to you, let's take a look.
Hotel lamps
Which lamps are generally used in hotels?
Hotel lighting design is divided into outdoor lighting and indoor decorative lighting.
1. Outdoor decorative lighting includes building facade lighting, courtyard lighting, square road lighting, fountain and modeling lighting, etc.
2. Interior decoration lighting includes lighting for lobby, guest rooms, restaurants, cafes, bars, banquet halls, conference halls, etc.; artistic decoration lighting (such as sculptures, reliefs, tapestries, murals, etc.) and key purpose lighting; office, kitchen lighting, etc. .
According to the material of the hotel lighting, it is divided into: crystal lamp, sheepskin lamp, copper lamp, iron lamp and so on.
Hotel lamps
How to buy hotel lamps?
1. Timeliness and durability
For general star hotels, small renovations and repairs are done every five years, and large renovations and repairs are done every ten years. In other words, the life of the lamps must be at least ten years or more to meet the requirements of star-rated hotels. Because the general small maintenance will not replace the lamps, the scope of human resources involved is too large. This means that in the selection of lamps, the quality of the most heated and pressurized parts of the lamp, including the reflector cup, heat dissipation components and fixed (positioning) components, is very important.
2. Flexibility
The light source used in general star hotels has a life span of about 2000 to 4000 hours. Therefore, the lamps will require replacement of light sources many times in 10 years. The number of lamps in star-rated hotels is over ten thousand, so replacing the light source also involves a lot of human resources, so the flexibility of the lamps is another consideration. And the most ideal luminaire selection is to install and unload the light source without affecting the fixed (positioning) components of the luminaire. This not only saves replacement time, but also provides a positive protection for the interior decoration.
3. Detail modeling
This includes all aspects of the lamp itself. Take a general ceiling downlight as an example. The spray quality of its trim (if it is metal, what is the surface quality), the smoothness of the reflector (if it is a frosted reflector, the uniformity of sandblasting), when After the lamp is installed in the ceiling, we need to pay attention to details such as the tightness (whether there is light leakage) with the ceiling surface (gypsum board/wood veneer). One more point, I need to mention that in addition to the hardware (lamps), the installation workers (craftsmanship) are also very important. In the decoration, it is necessary to ensure that the lamps are installed in the correct installation method.
4. Projection index
The Cutoff Angle of the luminaire, the effect of glare, how the light source is stored, the flexibility of the projection direction of the luminaire, and the expandability of the accessories all affect the selection of the luminaire. Especially in terms of the scalability of accessories, consider very carefully, because the "projection angle", "color/tone correction", "glare prevention", "accurate projection/illumination" and so on on the control projection index are extremely important. Part of it depends on these accessories to create the overall atmosphere.
Hotel lamps
The above is the knowledge problem of which lamps are generally used in hotels and how to choose and buy lamps in hotels, so I will stop here. I believe you should know more about it after reading it. The content is for your reference only. Helped.
