Why choose UVLED
First of all, let's talk about the difference between UVLED and ordinary LED.
The composition of UVLED (ultraviolet LED): It is composed of one or more InGaN quantum wells sandwiched in a thin GaN sandwich structure, and the formed active area is a cladding layer. By changing the relative ratio of InN-GaN in the InGaN quantum wells, the emission wavelength can be changed from violet to other light. AlGaN can be used to make cladding and quantum well layers in UVLEDs by changing the ratio of AlN, but these devices have poor efficiency and maturity. If the active quantum well layer is GaN, as opposed to InGaN or AlGaN alloys, the device emits a spectral range of 350 to 370 nm.
Ultraviolet radiation is produced when a short pulse of electrons is pumped at the blue InGaN light-emitting diode. Aluminum-containing nitrides, especially AlGaN and AlGaInN, can make devices with shorter wavelengths and obtain UVLEDs with a series of wavelengths. Diodes with wavelengths up to 247nm have been commercialized, and LEDs based on aluminum nitride that emit 210nm ultraviolet radiation have been successfully developed, and UVLEDs in the 250-270nm band are also under development.

Compared with traditional gas UV light sources such as mercury lamps and xenon lamps, the new UV output light source UV LED has strong advantages. Its main features are as follows:
(1) The number of opening and closing times does not affect the service life; while the ultraviolet radiation intensity of the traditional ultraviolet light source mercury lamp decreases with the increase of the cumulative opening times and ignition time;
(2) Long service life, more than 20,000 hours, and the life of traditional UV light sources is 100-1000 hours;
(3) High efficiency and energy saving, the photoelectric conversion efficiency of traditional UV light source is up to 60%;
(4) The spectrum is concentrated, ultraviolet light accounts for more than 98% of all light output, and there is no infrared radiation attached to traditional light sources;
(5) Small size, only 2.5px3, can be assembled into various forms of light arrays at will, and applied to different needs;
(6) The main peak is narrow and single: more than 90% of the light output is concentrated in the range of ±10nm near the main peak;
(7) DC low voltage drive: suitable for portable UV equipment;
(8) The output power is stable and continuously adjustable;
(9) Instant light output: no warm-up time required, and the response time is microseconds;
(10) Environmental protection: no mercury, no heavy metal pollution.
No matter how to choose and use the power of the light source correctly, it is very important to choose the corresponding light source band according to the UV glue, and a series of issues need to be paid attention to, and the advantages also need conditions to be displayed!
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web:
https://www.benweilight.com/.




