LED panel lights are widely used in hotels, conference rooms, factories or offices, commercial uses, residential or public facilities, schools, and hospitals where energy saving and high color rendering index lighting are required.
Pay Attention To The Following matters When Installing Led Panel Lights:
1. The installation of the product must be a certified professional electrician.
2. Check the integrity of the product when taking it out of the box.
3. The distance between the product and flammable materials should be at least 0.2m, and the zenith to be installed should have a gap of 2 cm. The lamps cannot be installed inside the zenith or on the wall with heat source. Pay attention to low pressure and high. Piezo wires are routed separately.
4. The wire on the lamp can be passed through the drilled hole and the wire behind the lamp can be fixed with a wire clamp to ensure that it is firmly fixed.
5. Make sure that the power cord of the lamp has sufficient length and not subject to tension or tangential force. Avoid excessive tension when installing the connection of the lamp, and don't make the connection knotted. The output connection should be distinguished and not to be confused with other lamps.
6. After installation, connect the low-voltage plug of the lamp with the low-voltage plug of the switching power supply.
7. Connect the switch power supply tail of the lamp to the mains. Usually the brown (black) wire is the live wire and the blue wire is the neutral wire.
8. Non-professionals are not allowed to disassemble and repair. Our company has the right to provide replacement or warranty services for products that are disassembled and repaired privately.
