Analysis of factory lamp manufacturers' analysis of installation precautions
Factory lamp manufacturers analyze the installation precautions. The company is mainly engaged in the research and development, production, sales and installation of solar street lights, LED street lights, wind and solar hybrid street lights, landscape lights, high pole lights, courtyard lights, antique lights, Chinese lights, traffic lights, and photovoltaic power generation products. The advantage of the factory lamp is that it does not need other power supply equipment, and it can convert heat energy into electric energy for its own lighting use, so that it can save a large part of power resources. In addition, solar roads and other high-tech products are designed to better meet the needs of modern people, and their installation is more convenient, and the service life is greatly improved. This reduces a large part of the maintenance cost and saves the expenses of related departments. It can be seen that while solar street lights bring convenience to people’s lives, they also save resources for the country. Therefore, solar street lights are more and more widely used.
1. The battery power cannot guarantee the lighting time:
If factory lights use high-power street lamp heads, it is difficult for the storage battery to reach the lighting time. This alone makes the high-power street lamp heads retreat. The energy-saving and high-efficiency factory lights are also based on the appropriate power LED street lamp heads. Customers Be sure to pay attention to this when purchasing factory lights.
2. Larger solar panels load the light pole:
If you choose a high-power street lamp head, the area of the solar panel must be large, but if the solar panel is made too large, it will inevitably produce a greater load on the street light pole. If the area is too large, the wind resistance will increase and the risk factor will increase. , There are hidden safety hazards that are not in line with the original intention of the factory lights.
3. Heat dissipation performance:
The heat dissipation performance of traditional high-power street lamp heads is not ideal. This is a problem that many peers have. Because the power of the light source is large, the heat cannot be evacuated quickly when the heat is upward, and excessive heat accumulation will easily cause the heat dissipation problem of the lamp, which will seriously affect the street lamp. The service life of the battery may even endanger the safety of pedestrians or cause the lights to go out. However, the high-efficiency lamp beads of Mingxingxin Lighting Appliance Factory do not have this problem. The multi-core LED luminous efficiency reaches 210lm/w, which is 75% higher than the ordinary luminous efficiency at 120lm/w, which has solved the problem of heat dissipation of high-power street lamp heads.
Factory lights should have a good heart. The heart of factory lights is the chip. The quality of the chip depends directly on the luminous flux of the factory lights, and the speed of light decay. The second is heat dissipation. The use of poor heat dissipation aluminum materials will reduce the life of factory lights due to excessive temperature. In severe cases, the power supply may be burned out. There is also the power supply. The power drive depends on whether the factory lights can work normally and the work efficiency and life span are affected.
In addition to the above points of attention, there are many things to pay attention to. The colors should be coordinated to avoid glare from the factory lights purchased. The light is soft and the brightness is uniform, which effectively avoids eye fatigue of the construction workers under long-term exposure. Factory lamp manufacturers choose poor heat-dissipating aluminum materials for heat dissipation. Excessive temperature will reduce the life of factory lamps. In severe cases, the power supply may be burned out. The mechanism of the luminaire should use a high-strength alloy shell. Such a luminaire can resist strong collisions or impacts and ensure the safety of life.
Unlike ordinary incandescent lamps, the light emitted by LED lamps always maintains a certain brightness. The light produced by the factory lamp holder will become brighter and brighter, and the brightness of the light source is relatively stable, which is popular. It is precisely because of these characteristics that LED street lamp heads are used by more and more people nowadays. It should be said that any substance has two sides, even LED lights are no exception. Although people are now using more and more widely for LED lights, on the one hand because of its energy saving and environmental protection, on the other hand because of its long service life, but it still has some shortcomings. On the one hand, the light of the LED lamp is unidirectional, and there is no scattering and diffusion, so the brightness and efficiency of the light can be guaranteed. At the same time, its light attenuation is very small, so it can be used for a long time, which can achieve the effect of saving to a certain extent. But usually the power of a single factory lamp is very low, so in order to obtain a large power, it needs to be used together. In addition, the white light has poor penetrability, which needs to be improved. In fact, there are still some problems with the heat dissipation of LED street lamp heads. If the heat dissipation problem of the street lamp is not handled properly, it will seriously affect its use effect.
In recent years, driven by the continuous deepening of globalization and policies related to the vigorous promotion of solar lighting products in various countries, the domestic solar street light industry has been well promoted. Coupled with the construction of many new rural roads, large-scale replacement of solar street lights is undoubtedly not a good opportunity for the development of China's solar street light industry. Factory lamp technology is exquisite, processing method is professional, aluminum alloy material, has the characteristics of good heat dissipation, light weight and high strength. After the surface of factory lamp holder is treated by anodizing method, it has good corrosion resistance, so it makes LED street lamp The lamp holder can also ensure the normal use of the factory lamp holder under the influence of the harsh environment.
