Application scope and types of high pole lights
Nowadays, we can see high pole lights almost everywhere in our lives, such as outdoor plazas, parking lots, and basketball courts. So here is a brief introduction to the high pole lights:
Types of high poles
1. The light pole is an octagonal, twelve-edged, and eighteen-sided pyramidal pole, which is cut, bent, and automatically welded to form high-strength high-quality steel plates. The general height is 15, 20, 25, 30, 35, 40, etc. According to specifications, the maximum wind resistance capacity can reach 60 m/s. Each specification consists of 2 to 4 sections of plug-in connections. Equipped with flanged steel chassis, with a diameter of 1 meter to 1.2 meters and a thickness of 30 mm to 40 m m.
2. The functionality is mainly frame structure, and some materials are mainly decorative. Steel pipes and steel pipes are the main materials. The lamp poles and lamp panels are treated with hot-dip galvanizing.
3. The electric lifting system consists of an electric motor, a hoist, three groups of hot-dip galvanized steel wire ropes and cables. The lifting speed of the equipment in the light pole body is 3 to 5 meters per minute.
4. The guiding and unloading system is composed of guiding wheels and guiding arms to ensure that the lamp panel will not move laterally during the lifting process, and ensure that the lamp panel can automatically fall and be recognized by the hook when the lamp panel rises into place.
5. The lighting electrical system is equipped with 62 4 4 0 0w-1 0 0 0w metal halide (white light), floodlight and floodlight lamps. The same number of Dexin light source 150W--240W LED floodlights can also be used, which is energy-saving and efficient. It works well. The computer time controller can automatically control the switch light time and partial lighting or full lighting,
6. Lightning protection system: a 1.5-meter-long lightning rod is installed on the top of the lamp, and a 1-meter-long grounding wire is installed on the underground foundation and welded to the underground bolt.
High pole light equipment
1. Each splicing point is provided with a socket length, but due to the influence of manufacturing, equipment errors and physical elements, there are changes in socket length, so the maximum socket length and the minimum socket length are provided.
2. In order to make the equipment convenient, a smooth collaboration surface may be required. Be careful not to use lubricating oil to prevent leakage and contamination of the rod body. You can use soapy water to smoothly connect the inside and outside surfaces.
3. When socketing, apply the necessary force at both ends to obtain a tight socket.
Features of pole lights:
Beautiful shape and strong decoration;
Large lighting area, good lighting effect;
The electric/manual lifting system is easy to operate. After the lamp panel is raised to the working position, the lamp panel can be automatically removed, hooked, and unloaded by the wire rope;
The light source lighting control is divided into manual, time control and microcomputer control.
Application scope of high pole light:
City squares, stations, docks, freight yards, highways, stadiums, overpasses, etc.
