Downlight installation diagram Downlight installation method Downlight installation precautions
The downlight has both the functions of lighting and decoration, and the embedded installation method can ensure the unity and perfection of the ceiling. Downlights do not occupy space in the home, but can increase the soft atmosphere of the space, so do you know how to install downlights? Let's take a look at the installation diagram of the downlight.
Downlight installation diagram Downlight installation method Downlight installation precautions
Downlight installation diagram
Downlight installation method
1. Make a round hole on the ceiling according to the size of the hole;
2. Pull out the power supply cord and connect it to the power cord of the lamp. Note that the wiring must be firm and not easy to loosen;
3. Hold the two sides of the lamp installation shrapnel by hand, and press it toward the middle to align the installation hole, and push it into the ceiling;
4. The lamp is positioned on the ceiling by the elastic force of the installed shrapnel, and the test pin is turned to the cover to feel its strength and tightness;
5. When disassembling the lamp, please turn off the power, grasp the lamp socket with your hand, press the cover, and pull it down forcefully.
Precautions for downlight installation
1. Check whether the product is in good condition immediately after unpacking the downlight. If there is a failure caused by non-man-made or specified requirements in the manual, it can be returned to the retailer or directly returned to the manufacturer for replacement.
2. Cut off the power before installation, make sure that the switch is closed to prevent electric shock, and do not touch the surface of the lamp with your hands after the lamp is on. This lamp should be avoided to install in the place of heat source and hot steam, corrosive gas, so as not to affect the life.
3. Please confirm the applicable power supply according to the installed quantity before use. This product is for indoor use only. When outdoor, please pay attention to waterproof installation and make sure that the installation position can bear 10 times the weight of the product.
4. The product uses high-voltage (110V/220V) power supply lamp cups, it is not suitable to work in the state of frequent power-on and power-off, which will affect its life.
5. Install it in a flat place with no vibration, no swing, and no fire hazard. Take care to avoid falling from high altitude, collision with hard objects, and percussion.
6. If it is not used for a long time, the downlight should be stored in a cool, dry and clean environment. It is forbidden to store and use it in humid, high temperature or flammable and explosive places.
