You undoubtedly have some queries if you intend to switch from fluorescent troffer lights to LED panels. The distinction between edge-lit and back-lit LED panels is one of the most often asked concerns concerning commercial lighting renovations.
The good news is that you are already headed in the correct direction because you are switching to LEDs. In addition to the increased light quality, switching from conventional commercial lighting to LED lighting has significant environmental and energy-saving benefits.
Regardless of the LED flat panel lights you select, you will benefit from exceptional energy efficiency and strong, consistent light. You'll be astounded by the impact that high-quality lighting has on your room because it doesn't require any setup time, doesn't flicker or buzz, and produces stunning color rendering.
To suit any lighting project, TCP provides a large selection of LED flat panels. To shop them all, click here.
The Distinctions Between Backlit and Edge Lit Panels
When it comes to office and commercial lighting, LED flat panel lights with edge and back lighting are more popular than ever. Modern LED technology makes it possible to produce incredibly tiny flat panel lights. When it comes to lighting schemes, creative ideas offer countless possibilities.
The decision between edge-lit and back-lit LED flat panel lights is one of the most important ones you will have to make. Each choice has unique benefits and drawbacks. We'll go into the specifics below to assist you in choosing the best option for your business location.
Edge-lit LED panels' advantages
Edge-lit panels: what are they? A row of LEDs is affixed to the panel's perimeter to create edge-lit panel lights. A light-guide plate receives the horizontal light from the LEDs. Through a diffuser, the light is subsequently directed toward the floor by the light-guide plate.
Another name for edge-lit panels is side-lit panels.
Advantages: Stylish profile. Because edge lighted panels are so thin, they have both practical and visual appeal.
Adaptable installation choices. These lights can be installed with a variety of ceiling types because they are so thin. These consist of surface mounts, suspensions, and the typical drop ceiling installation.
Cons: The price per fixture. Compared to back-lit fixtures, edge-lit panels use more LEDs per light. This indicates a little greater cost per fixture, which raises the total energy bill.
The advantages of backlit panels
An array of LEDs that beam vertically down from a horizontal plate through a diffuser makes up backlit LED panels, as opposed to edge lit panels. Direct-lit panels are another name for back-lit panels.
Advantages: Minimal weight. Backlit panels are lightweight and long-lasting, with a simple design. As a result, installation is considerably less difficult.
economical. These panels' backlighting feature allows them to produce more lumens with fewer LEDs than edge-lit LED panels. This preserves brightness while reducing the cost per fixture by roughly 30%.
Cons: More in-depth profile. Backlit panels could be a bad option if you're searching for a very thin fixture. This is due to the fact that they need a deeper housing, which usually results in them being around twice as thick as alternatives to edge lighting. They are therefore best suited for situations involving drop ceilings.
Benwei Flat Panel Lighting
Do you want to improve the flat panel lights you currently have? Beginning a brand-new project from the beginning? With stunning, long-lasting, and energy-efficient flat panel lighting, Benwei's lighting specialists are prepared to assist you in transforming your area.
