Edge-Lit vs Backlit Flat Panel Lights – What are the Differences?

Since LCDs don't produce their own light, they require help from other lights. You can either use backlit LEDs or edge-lit LEDs to produce this light. The arrangement of the lighting is the main distinction between LEDs that are edge-lit and backlit. Edge-lit displays have their light sources mounted on a diffuser, which is typically a thin sheet, behind the LCD.

The thinner design of an edge-lit flat panel LED display is a key benefit. The screens are consequently positioned on the edge rather than directly behind the LCD. It causes the diffuser to be thin. Most thin diffusers transfer the majority of the components to a large stand and are typically edge-lit rather than backlit.

Although switching from fluorescent to LED troffer lights offers advantages, the transition may be difficult and time-consuming. Edge-lit panels or backlit panels are both options. The key variations between these panels are listed below.

The following are the two key distinctions between edge-lit and backlit panels:

The location or placement of the LEDs
light scattering.
flat panels with edges lit

Edge-lit light panels are positioned on the frame's edge, where the LEDs will be located. A light guard panel that directs the light it generates sideways protects it. The light board is made to distribute light in a place smoothly and uniformly. The thin depth of the panel contributes to the diffusers' elegant appearance. Edge-lit can be installed in a ceiling with a regular grid. Edge-lit LEDs can also be installed on walls and ceilings using suspension box or cable installation kits thanks to the board's svelte and thin design.

Flat Backlit Panels

Backlit, as the name suggests, is positioned behind the frame rather than at the edge. The LED shines right out and straight through the diffuser when it is in this position. LED that is backlit does not have a light guard. As a result, there is no need to direct the light because it radiates outward directly. Because the backlit LED also incorporates a diffuser that softens the light, there is no glare from the direct straight light. Since there is no need for a light guard, there is no chance of it yellowing. Backlit is more effective than edge-lit due to the directness of the LED light. In contrast to edge lighting, where light passes through the diffuser panel, back lighting simply allows light to pass through the thickness of the material.

Edge-lit and back-lit panel lights have drawbacks.

Edge-lit LED panel production and shipping are very expensive. An pricey edge-lit LED panel is necessary due to its technology.

The thickness of Backlit's diffuser is a drawback. It cannot be installed randomly. It has to be fitted in a ceiling with a drop grid. Despite having a thicker display than Edge-lit, it is nonetheless simple to use because of how light it is all around.

Due to the thinness of the panel and the ability for the LED models to heat up, edge-lit could turn yellow. Edge-lit's lifespan is shortened as a result.

There is enough room between the led modules to allow for cooling, extending the life of the light.

Edge-lit is only appropriate for a limited area because it isn't bright enough for a large space due to the light's dispersion.

The Backlit can be installed in high ceilings and has direct light.

Making the ideal choice for your area as a novice would be made easier if you were aware of the differences between these two panels.
 

Backlit Panel Light

Feature:

● Ultra Slim Diesign
● Contemporary & Elegant Design
● Higher Light Transmission Rate
● Exterior shell,cannot easily damaged
● No infrared,does not attract flies
● Easy to install
● No Lead or mercury content hence Environment friendly
● Dimmable options available in selected models

Specification: