Knowledge

Home/Knowledge/Details

Factors need to consider when connect LED strip lights?

While clipping and soldering are two different methods of connecting LED strips, both have certain requirements to work. 


Here are some factors you should consider when connecting LED tapes to each other:


2.1 Always cut LED wires from the copper connections you will find every 2 inches or so in the LED tapes. This is important so that the essential LED components on the tapes don’t get damaged.


2.2 For soldering and clipping, LED tapes need to be exposed. So carefully remove the plastic casing of the tapes right next to the copper connections. Make sure to expose the lettering as well. This step is not needed when using hippo connectors


2.3  When connecting tapes through soldering or wire connectors, make sure to match the right wires on each LED strip to each other. So, red connects to red, green to green and so on.


2.4 Always use a heat shrink cover to protect the connections. Indoor and outdoor heat shrink covers are different, so make sure to get the right one.