Step 1: Calculate LED Strip Wattage
Ideally, you should already have an idea of how much power will be required to run your LED light tapes.However, there might be some additions or subtractions in the number after you’ve cut and connected the tapes together.So, calculate the overall wattage required to power your flexible LED light strips again.
This can be done easily by multiplying the length of the strip by the wattage per meter of the strip.For example, if you have a 5m long strip with 6W/m power draw, you will need a transformer with a capacity of at least 30W to power it. You can find the power draw information for each LED strip on its packaging or on the manufacturer’s website.
Another consideration when calculating strip wattage is the voltage requirement for the strip.Generally, LED strips have a 12V or 24V voltage requirement.You have to choose a power source that is compatible with the voltage of the LED light strip, otherwise, it might not work. Wrong way connect led strip light.
If you’re using the same LED light tape for your entire project then multiply the length of the entire strip you want to power from a single source with the wattage per meter.This will give you the power capacity of your power source. If you’re using different types of LED ribbon lights then calculate the wattage requirement for each of them and add it all. This will give you an idea of how much juice they need to work.




