Features of LED high bay light power supply and installation precautions
What are the characteristics of LED high bay light power supply: 1. LED high bay light power supply has high luminous efficiency The luminous efficiency of high bay light is above 100 lm/W, and it will continue to improve in the future. In the future, it may reach more than 3 times. The efficiency of LED high bay lights mainly refers to the effective light efficiency. The high bay lights emit light at 120 degrees, so all light is effective light. Although the 120-degree light-emitting angle is sometimes a bit narrower, it is still sufficient in most cases. 2. The power efficiency of LED high bay light power supply is usually as high as 90%, which can save more than half of the electricity compared with ordinary lamps. LED high bay lights are generally used for lighting in factories and workshops, and the number of lamps is relatively large. , So the power saving function is still very practical. 3. Long life of LED high bay light power supply. The life of a high bay light can reach 50,000 hours. The life of an ordinary lamp is usually only 5,000 hours (some domestic lamps have only 300 hours of life). The difference between the two is nearly 10 times. Although some poor high bay lights only have 10,000 hours, they are still nearly 5 times different from ordinary lights.
Led high bay light is a kind of lighting that can be used in factories, industrial and mining enterprises, petroleum, chemical, smelting and other production workshops, warehouses and workshops, and can also be used in large shopping malls, indoor gymnasiums and other places. But when using it indoors, you need to pay attention. 1. Before installing led industrial and mining lamps, the power supply needs to be cut off; 2. Please do not connect the high-voltage power supply before installing the product, and connect and use it strictly according to the nominal working electrical parameters of the product; 3. If the external power line and signal line of the lamp are damaged, it must be First cut off the power supply and repair or replace by qualified engineering and technical personnel; 4. The power supply and lamp beads used in high bay lights must be replaced and installed by professionals; 5. During the construction and installation process of high-power LED floodlights Construction personnel are strictly prohibited to use violent means to install and construct; 6. Pay attention to the treatment of fire prevention, electricity prevention, and earthquake prevention.
