How Integrated Solar Street Light Work?
All in One Solar LED Street Light Installation
Choose an exact place with open, unshaded sunshine.
Make the ground base for the pole.
Prepare the iron/steel/wood/cement pole with 2’ to 3’, thickness＞5/64’ – 14ga
Install the pole in the ground base.
Open the luminaire package, check all accessories are in place & ready.
Take out the pin, then switch ON the lamp and check the LED’s status.
Fix the holder on the lamp fixture (figure 1), then put the fixture on the top of the pole, insert the holder and fix it with screws (figure 2).
| ITEM | CONVENTIONAL DESIGN | ALL IN ONE DESIGN | |
| Product Features | Mobile Remote Control | NO | Optional |
| Initial Purchase Cost | HIGHER | Lower | |
| Transportation Cost | HIGH | Low | |
| Product Warranty | 2001/2/3 | 3/5 years | |
| Product Size | BIG | Small | |
| Applications | Road Street Square etc | Road Street quare Home | |
| Parking lot Garden | |||
| Mining, Farm, etc. Portable as emergency lighting | |||
| Project Engineering | Pole Basement Work | Yes/NO | NO |
| Labor Cost | Complex | Simple & Easy | |
| Wind-proof | Common | Better | |
| Installation Time | 30 to 60 minutes | Within 10 minutes | |
| Fault Rate | High | Low | |
| Post Maintenance Cost | Medium | Low | |
| Project Complexity | Medium | Low | |
| Additional | Battery Box | Big | Small |
| Accessories | Solar Panel Bracket | NO | Yes |
| Cable | Yes | No | |
| Controller | Yes | No | |
