How to choose LED lights in lighting factory workshop?
LED lighting is of high quality and low price, and the difference between factory workshop lighting is obvious. How to choose lamps and lanterns, factory workshop lighting projects mainly have higher requirements for lighting lamps. It depends on the following aspects:
1. Material selection
Lighting materials on the market vary greatly, and the prices of lamps of different materials vary greatly. Let us take ordinary LED lights as an example, the price difference between glass and aluminum can be more than 20 yuan. Choosing good materials Factory workshop lighting plays a major role in heat dissipation.
2, the choice of weight
Many people are more concerned about the weight of the lamp when choosing lamps in the workshop of the lighting factory. This is not decisive and cannot be determined completely based on the weight. Most lights are all plastic, with a glass case and FR4 board, if an aluminum heatsink is a good point, then it will supply a heavier plastic fill.
3. Determine the parameters
External parameters are not an important criterion for measuring the quality of lighting projects, but are determined based on power parameters, aging heat dissipation effects and actual measurements.
Factory workshop lighting uses more electricity, such as high-power E40 lamps such as high bay lamps, spotlights and bulbs. Brightness and life are the primary guarantees for sellers.
In addition, the dead light phenomenon means that the LED light has different degrees or flickering light when it is started. There are two reasons for the damage of the LED: one is that the voltage is gone; the other is that the current exceeds ds: the leakage current of the withstand voltage test is about 10mA, which generally does not exceed 10mA. The allowable current value of the LED. The maximum voltage that can cause damage to the LED may be exceeded.
The reasons are analyzed as follows:
1. The quality of LED chips, especially the green light and blue light, is very easy to die
2. There are performance drivers and heat dissipation is a major aspect. If the water content of the lamp bead colloid is too high, it is likely to cause short circuit and leakage.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
