1. The effect is different.
The most critical function of road lights is also lamps, which should be able to show better lamp chromaticity for non-motor vehicles and cars. However, the landscape lamp only needs basic lamps and lanterns. The most important thing is the ornamental value, which is used to decorate the surrounding environment and build the atmosphere.
2. The thermal efficiency of lamps is different.
The thermal efficiency of road lighting lamps is usually higher, in the range of 250-400W, and it should be considered based on the total width of the road surface, the surrounding plants, the aspect ratio of the light poles, and whether it harms nearby residents.
The thermal efficiency of landscape light fixtures is relatively small, usually 80-150W, but it will also be smaller. This is because the landscape lamp has the basic lamp function, and its greater function is to have a stronger viewing value. Its lamp source thermal efficiency can reflect the overall appearance of the lamp, and it does not need to be too bright.
3. The aspect ratio is different.
The basic aspect ratio of road lighting is 6-12 meters, and some road lighting has a basic aspect ratio of 6-20 meters. However, the usual aspect ratio of landscape lights is 3-6 meters. Because landscape lights are for viewing purposes, they don’t need to be too high. The higher the quality, the larger the material and the more expensive the project budget.
4. Different venues are used.
Road lighting is usually used in areas such as main roads, secondary roads, commercial squares, residential areas, etc., in cities or rural areas, and the requirements for lamps are usually relatively large.
Landscape lights are usually installed in separate areas, such as public circles, landscapes, high-end apartments, commercial streets, and entertainment commercial centers. In many tourist areas, landscape lights will also appear in the back.
