How to directly replace fluorescent lamps with LED fluorescent tubes?
The energy saving ratio of LED fluorescent lamps instead of traditional lamps! Use LED fluorescent lamps to save more than 60% of electricity bills.
4WLED fluorescent tube=11W traditional tube
8WLED fluorescent tube = 22W traditional tube
12WLED fluorescent tube = 32W traditional tube
15WLED fluorescent tube = 40W traditional tube
18WLED fluorescent tube = 48W traditional tube
20WLED fluorescent tube = 54W traditional tube
25WLED fluorescent tube = 68W traditional tube
36WLED fluorescent tube=95W traditional tube
45WLED fluorescent tube = 120W traditional tube
Originally, the old-fashioned ordinary fluorescent lamp bracket has been installed, first remove the fluorescent tube and the starter,
Then replace the purchased LED fluorescent tube, which can be used directly after power on. Note that there are two original fluorescent lamp brackets: one inductive ballast; two electronic ballasts,
There is no need to make any modification to the inductive ballast, but the electronic ballast must cut all the wires, remove the electronic ballast, and connect the neutral wire and the live wire to the two ends of the lamp holder respectively.
The advantage of this product is that the circuit does not need to be modified, the power consumption is very low, the service life is long, and the lamp has no special temperature
The led lamps that Langte Lighting can make include: infrared induction led lamps, radar induction led lamps, voice-activated led lamps---used in garages, intelligently controlled. "The lights are on when the car comes, and the car is half-bright." Energy-saving 85%, waterproof led fluorescent tube---used in cold storage, refrigerator, freezer to dimming led tube---conference low-voltage 24vled tube---used in machine, instrument, car for plant growth led fluorescent tube--- Used in agriculture, to promote the rapid growth of crops, compatible with ballast LED tubes (no need to modify the line) --- labor is too expensive, and it is directly replaced. Applicable to European Osram, Philips, Japan, and the United States electronic ballast emergency led fluorescent tube --- used for emergency use in the event of a power failure. All plastic tube led tube-heat-dissipating plastic, low price, quality guaranteed.
