How to do factory lighting with led tube?
Led tube factory lighting, contrast is required, because of the large area, then generally use a large illuminated area of Langter led tube, led high bay light and led downlight are better. Langte produces high-brightness LED tubes with stable quality and engineering level, which is especially suitable for LED tube factory lighting.
Led tubes are widely used in workshop production lines in factory lighting. In order to improve work efficiency, the contrast is relatively high, led tube is the best choice. Traditional fluorescent lamps consume a lot of energy, are easily broken, are frequently repaired, and contain ultraviolet rays, which can damage the eyes. The illuminance is much lower than that of LED tubes. Similarly, the illuminance of a 1.2-meter LED tube at a height of 1 meter can reach 450-500 lux, while the illuminance of a traditional fluorescent lamp is only about 300-400 lux, which doubles the energy consumption. For some specific stations, you can also make LED tubes with higher illuminance requirements, and even change the color temperature and color.
LED tube factory lighting is used in the office, firstly it saves 60% energy, and secondly, there is no noise. Traditional fluorescent lamp ballast is noisy. Again, there is no flicker, eye protection, and finally, no ultraviolet rays, no mosquitoes, so there are many benefits.
LED tube factory lighting tubes are selected carefully, and the quality assurance requirements are high. Generally, the quality assurance is three years, and the number of replacements is reduced. The color temperature is about 6000k, which is conducive to the concentration of employees at work. The color rendering index is 70-80, which is high. It is more cost-effective than ordinary fluorescent tubes.
From the point of view of energy saving effect of led tube factory lighting, the energy saving effect is very obvious, saving 60%. If high-efficiency tubes are made, the power can be lower and the brightness is inconvenient. If the factory has 1000 tubes, it is compared with ordinary fluorescent lamps. Said that it will save 99,000 kilowatt-hours of electricity each year, saving 90,000 yuan in electricity costs, free of maintenance, and saving labor. The initial investment is also small. It only takes 4 months for a one-time investment to recover the cost, and the rest is useless. The economic benefits are very obvious. As the cost of the lamp has been greatly reduced, the technology is also mature, and the quality is very stable. Therefore, now is the best time for energy-saving renovation. Use early to benefit early. Especially under the current downward pressure on the economy, energy conservation is a top priority
