How to extend the service life of high pole lights
High pole lights are large-scale high-end lighting products. LED street lamp manufacturers are a solid-state cold light source, which has the characteristics of environmental protection, no pollution, low power consumption, high light efficiency, and long life. Therefore, LED street lamps will become a good choice for energy-saving transformation of road lighting. LED street light is a kind of high-efficiency solid-state light source formed by semiconductor PN junction that can emit light with weak electric energy. Under a certain forward bias voltage and injection current, the holes injected into the P zone and the electrons injected into the N zone are in After being diffused to the active area, photons are emitted through radiation recombination, which directly converts electrical energy into light energy. Because of its high price, customers are very concerned about its service life. LED street light is a kind of high-efficiency solid-state light source formed by semiconductor PN junction that can emit light with weak electric energy. Under a certain forward bias voltage and injection current, the holes injected into the P zone and the electrons injected into the N zone are in After being diffused to the active area, photons are emitted through radiation recombination, which directly converts electrical energy into light energy. After all, this is a problem of several hundred thousand yuan. If it breaks after three to five years, it is not worthwhile. What is the service life of the high pole lamp? How to extend the service life of high pole lights? Now let us do a detailed analysis.
The components of the high pole lamp include the main pole, the lifting system, the lamp panel, and the lamp holder. It can be seen intuitively that only the head is the type of electronic product in the high pole lamp assembly. We are well aware that electronic products are prone to problems. Let's start with the rest of the high pole lamp.
Main pole: The main pole of a high pole lamp with a height of more than 20m is generally made of steel plates with a thickness of 6, 8, and 10 mm. After the light pole is rolled up, the joint shall be welded with a large embedded Fox machine. The solidity of the welding position should not be less than the robustness of the entire board. After the high pole lamp is welded as a whole, the inner and outer surfaces should be hot-dip galvanized. A qualified galvanizing process can ensure that the main pole will not rust within 15 years. Of course, an unqualified galvanizing process will not achieve this effect. Therefore, when manufacturing high pole lamps, it is necessary to weld firmly and choose a formal galvanizing process.
Lifting system: The lifting system is the core part of the high pole light. The lifting action of the light board depends entirely on the lifting system. The lifting system of the high pole lamp is mainly a lift and a steel wire rope. If the wire rope is not broken, the hoist cannot be broken for more than ten years. Why did you say that? First, the traction machine is installed on the main pole. The wind cannot be soaked, and it will not cause line aging. Secondly, the hoist is rarely started. If the light source is not bad for 10 years, then don't use it for 10 years. Therefore, it is difficult to deteriorate the lifting system.
Lamp panel: The function of the high pole lamp panel is to load the light source, and the shape is very diverse, but it is always inseparable from its original intention. More appearance is completed by bending and welding, and its solidity is indestructible. Most of the 41,000-watt high-pressure sodium lamps equipped with 20 are a carriage with a large saber. It's hard to be a bad guy.
Lamp holder: Let’s go on to say that the lamp holder, whether it is a lead lamp, a high-pressure sodium lamp or a high-pressure metal halide lamp, is an electronic type product. Only laymen know about electronic products, but they don't know why. On the surface, there is no good or bad thing about this kind of thing. The light source is the main part of the whole set of high pole lights, because the high pole lights are street lights. The role of street lights is to illuminate. If the light source is broken, it is equal to a high pole lamp. Therefore, the quality of the light source is particularly important. When configuring the light source, a regular brand must be selected. Specializing in the production of high pole lights for more than ten years, the product quality is reliable and the certification is complete.
In short, it is important in the light source to extend the service life of the high pole lamp. It is the basis to extend the life of the high-pole lamp manufacturer, and choose a reliable high-pole lamp manufacturer.
