How to install lithium battery solar led street light correctly
In recent years, with the deterioration of the global environment, solar energy resources have received more and more attention. Solar led street light is a high-efficiency solid-state light source based on a semiconductor PN junction that can emit light with weak electrical energy. Under a certain forward bias voltage and injection current, it injects holes in the P area and electrons in the N area. After being diffused into the active area, photons are emitted through radiation recombination, which directly converts electrical energy into light energy. Solar led street light manufacturer is a solid-state cold light source, which has the characteristics of environmental protection, no pollution, low power consumption, high luminous efficiency, and long life. Therefore, solar led street lights will become a good choice for energy-saving transformation of road lighting. To this end, countries are increasing the layout of solar energy resources. LED street lamp manufacturer is a solid-state cold light source, which has the characteristics of environmental protection, no pollution, low power consumption, high light efficiency, and long life. Therefore, solar led street lamps will become a good choice for energy-saving transformation of road lighting. LED street lights are a branch of solar energy applications. There are integrated led street lights and split led street lights on the market. Solar lighting is mainly integrated with led street lights and split led street lights. The integrated led street light is equipped with solar panels, light sources, controllers and batteries. One advantage of integration is that it is easy to purchase, transport, install, and maintain. Speaking of installation, many people don't know the relevant knowledge of led street lights, and don't know how to install it. Today's small series of solar lighting summarizes the installation of some led street lights.
Installation Manual
(one) choose address
1. According to the direction of the road and the position of the light source, choose the direction of the light source, pay attention to the latitude of the light installation, and adjust the angle of the solar panel. The inclination angle is based on the local latitude, so that the solar panels can meet the large lighting area of the road.
2. The led street light must be installed in the light and the light surface of the solar panel does not block the shadow all day long. Taking the northern hemisphere as an example, the solar panel faces south; in the southern hemisphere, on the contrary, it sits on the southern side of the northern hemisphere, and the panel can be placed near the equator.
3. The solar lamps should be kept away from heat sources as much as possible to prevent the service life of the lamps from being affected.
4. Ambient temperature: -20°C~60°C. In colder environments, system configuration should be added to increase temperature protection.
5. There should be no direct light source above the solar panel. In order to avoid misunderstanding of the light control system leading to misoperation.
Installation misunderstanding
(two) foundation
1. Foundation embedded installation (demonstration diagram)
Foundation pit:
Investigation address: If the soil is hard, the location of the lamp is about 1 cubic meter (depending on the height of the lamp post), if it is soft soil or there are special requirements, the excavation depth shall be determined separately.
(three) installation
The first step: inspection and testing;
1. Check whether the accessories are complete.
Test whether the light is working properly.
According to the demonstration mode the light can work normally, it can be considered that the light is good. The test is complete: Please use the remote control to set your own mode.
Step 2: Assemble the lamp components;
1. Remove the three screws fixing the top cover, and fix the top cover.
2. Fix the fixture from the accessory bag to the solar panel with six screws.
3. Adjust the angle of the solar panel in advance, and assemble the solar panel and lamp holder.
4. The solar cell module should be firmly and reliably connected to the bracket.
5. The output line of the module should be avoided to be exposed and fixed with a belt.
6. The orientation of the solar panel should be true south, based on the compass pointing
Note that the non-slip screws should be tightened.
Benwei Solar Street Lights Outdoor Lamp
Product Features:
>LED light, solar panel, lithium battery and controller,all in one compact design.
>No wiring,100% solar powered ,easy to install and ship.
>Built-in infrared sensor,can adjust the light output automatically(time control + light sensor control+ motion sensor control).
>Rust-proof, dustproof and waterproof IP65.
>5 years warranty.
