How to install the tri-proof light
The service life of the three-proof lamp is about 10,000 hours or more, and it is suitable for outdoor large-area and unguarded lighting places.
The shell is made of light alloy material and technology spraying technology, which is not easy to rust and corrode. The double shock absorption design of structure and material ensures that it has good seismic performance. In addition, through the hemming process, the overall performance of the casing is guaranteed to be good, the sealing performance is strong, and it can be waterproof and dustproof. At the same time, it has good electromagnetic compatibility to ensure that it will not cause electromagnetic interference to the surrounding environment. Because its overall temperature rise is relatively low, the heat dissipation performance is relatively good, reducing the probability of failure.
There are usually two installation methods for tri-proof lights:
1. Suspension installation. During the installation process, the hoisting adapter plate is fixed on the lamp with bolts, and then the cable is connected to the lamp, and the pipe thread of the lamp and the wiring steel pipe with standard pipe thread are used for tightening. This is suitable for places with very high heights and a wide range of lighting.
2. Ceiling installation, according to the size of the installation hole of the three-proof lamp, the corresponding installation bolt holes can be marked on the position to be installed. The next step is to install the tri-proof light on it and fix it with bolts.
