LED light with transformer need to consider the six major factors
Six factors to consider for LED strip transformer, LED strip is one of the best decoration for indoor and outdoor areas. These strip lights add a unique feel, while LED curtain lights will bring a more romantic and festive feel to the surrounding environment. LED strips are very flexible. They can provide higher brightness while consuming less energy than traditional lighting solutions. To obtain this decoration, be sure to select the best LED strips on the market. High quality LED lamp with self-adhesive and substrate, LED regularly placed on the substrate. Once installed and powered on, the entire strip will be illuminated, producing forward light.
LED strip transformer factor one, temperature
LED transformers operate safely and efficiently within the set temperature parameters. Avoid placing LED transformers in poorly ventilated areas, as this can lead to heat buildup and damage.
LED strip transformer factor two, the average time before failure
The life expectancy of the transformer depends on your running condition in the LED application. Unless you ignore the recommended output while running the LEDs, the transformer will take thousands of hours to reach a flat state. Proper use of equipment will prolong its service life and reduce maintenance costs. According to LED Journal, if the temperature of your LED transformer is properly controlled, it should produce more than 70% of its initial light output after 50,000 hours.
LED strip transformer factor three, the output voltage
Specified in volts, it is critical to match the observed values to the voltage requirements of the LED. If multiple LEDs are planned, the individual voltages are summed and a transformer matching that value is obtained.
LED strip transformer factor four, IP level
Determine the water or dust resistance required for your LED transformer. Is it susceptible to moisture, dust or solids after installation? An IP rating of 44 will protect it from thicker objects that are greater than 1mm and splashed with water rather than dust. IP66-rated transformers will be protected against dust and water. The IP rating is given as a number, with the first number representing the protection against solid objects of different sizes and the second number representing the pressure of a liquid, such as a water drop.
LED strip transformer factor five, output current
Comply with transformer current requirements usually in amperes or milliamps. It can be given in the range of 350 mA, 500 mA, 700 mA, 1050mA equivalent or 0mA to 500 mA. Match the ampere rating to the ampere rating required for your LED. You may want to run the LED application at a lower current to improve durability.
LED strip transformer factor six, output power
For safety, make sure that the wattage of the transformer is at least equal to or greater than that of the LED. If the output is equal to the average power requirement of the LED, then the life expectancy of your LED transformer will be short. This is because the transformer is already operating at full capacity. If you intend to run more than one LED with one transformer, total the power to find the total number of watts used. Next, take the total and add a 30% buffer to it, and then find the transformer with the power rating.
The above is about the LED lamp transformer need to consider the six factors to share, I believe that after reading the above summary, we have a certain understanding of this knowledge, want to know more about the LED lamp transformer information, you can go to the customer service for consultation.
Shenzhen Benwei Lighting Technology Co., Ltd is a professional manufacturer in producing LED lighting products, Our main products T8 T5 LED Tube, LED Grow Light,Poultry LED Light,Tri-proof LED Light,LED Flood Light, LED Panel, LED Stadium Light, LED High Bay, LED Strip light, If you want to purchase a high-quality LED lighting products or have a more in-depth understanding of the application of LED lighting, please contact send us inquiry.
