At present, the outside of the general LED line light is made of conductor material, which itself is equivalent to a lightning rod. In the design, the down conductor and the ground grid must be installed. These systems constitute the external lightning protection system. The system can avoid the fire and personal safety accidents caused by the direct lightning strike of the LED linear lights. The internal lightning protection system refers to the street lamp, and the equipment is protected internally by grounding, setting voltage protection, etc. The system can prevent inductive lightning and other forms of over-voltage intrusion, resulting in power damage, which is not guaranteed by external lightning protection systems. The two complement each other and complement each other. The internal lightning protection system must be connected to the external lightning protection system or set up overvoltage protectors on many components such as the casing, cables entering and leaving the protection zone, and metal pipes, and perform equipotential bonding. In order to completely eliminate the destructive potential difference caused by lightning, power lines, signal lines, metal pipes, etc. should be equipotentially connected with overvoltage protectors, and local equipotential bonding should be performed at the interface of each inner protection zone. The local equipotential junctions are connected to each other and then to the main equipotential point.
Compared with traditional light sources, LED line lights have unparalleled advantages:
1. Super long life. The actual life of LED line lights exceeds 50,000 hours, which is several times or even dozens of times that of general light sources.
2. High purity, bright and rich colors. At present, LED products cover almost the entire visible spectral range with high color purity. The traditional way to obtain colored light is incandescent lamps and filters, which greatly reduces the light efficiency.
3. Dynamic color control, adjustable light and shade, LED combination of three primary colors can use PWM to realize color change.
4. There is no mercury in the light source, and no ultraviolet rays in the beam. LED is a solid luminescent light source, green and environmentally friendly, especially suitable for professional places such as perfume stores, jewelry stores, museums, art galleries, etc., and can meet the special requirements for lighting of the displayed products.
5. Solid light, good shock resistance, firm and reliable.
6. Energy saving, economical and maintenance-free.
7. LED line lights have strong luminous directionality, high luminous flux utilization rate, and small size, which is easy to design and control the light intensity distribution of LED lamps.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: https://www.benweilight.com/.
