LED panel light assembly process
Advantages of LED lamps: energy, environmental protection, long life; convenient control; colorful colors, flexible application. Let's talk about the assembly process of LED panel lights.
LED panel light manufacturers
There are two ways to install LED panel lights, which can be mounted on the ceiling, or hung on the wall or on the surface of the installation body.
Assembly process:
1. Put the heads of the four screw rods into the holes of the back cover of the lamp body;
2. Slide the four screws to the small hole and make sure that the cross plate is stuck in the cover;
3. Align the holes of the power supply structure with the four screws. If there is any irregularity, move it slightly;
4. Tighten the nut and screw to fix the power supply to the panel light box;
5. Connect the bolt-type structure of the power output end to the bolt-type card position inside the box body, and insert it in conjunction with it, not forcibly inserting it in the reverse direction.
6. Insert the lamp body into the ceiling, connect the plug to the power source, turn on the switch, and turn on the panel light.
Note: The panel light is designed to be the same size as the ceiling. When embedded, it cannot be placed at an angle to prevent it from slipping off. As each construction method is different, please focus on checking whether the smallpox dragon frame can bear its weight and whether the embedding area matches, otherwise, reinforce the panel light and hang it.
