LED street lamp maintenance: take solar panels as an example, usually maintenance to check the azimuth of solar panels, whether there are branches, leaves or other foreign direct occlusion. Whether in the shadow area of other objects, whether the surface has cracks, dust, dirty lamp. Whether the monomer is cracked, whether the line is smooth are in the scope of inspection. In the LED street lamp use system, the battery is the most difficult maintenance, because the current normal battery life in 2 ~ 3 years, in its life cycle but also often check the battery charge discharge, at any time to observe whether there is corrosion or bad contact electrode or wiring. This is the main maintenance work for LED.
How to carry out LED street lamp waterproof work?
For the sealing of the lamp is to pass, the waterproof treatment of the lamp can ensure the service life of the street lamp, so the choice of the shell of the street lamp is very important. When choosing, we must pay attention to whether the style has waterproof performance. For the controller, when installed, it is generally placed inside the street light, so as to better avoid exposure to the wind and sunlight. Is to have a certain degree of waterproof performance, for the installation of the battery, the battery is buried in the ground, about 40 centimeters in about place, so as to avoid flooding. Finally, to detect the LED street lamp head, see whether the street lamp is normal light, if the light can be used normally, if not, it needs to be replaced.
