Explosion-proof LED light is a kind of explosion-proof light, and its principle is basically the same as that of explosion-proof light. The difference is that its light source is an LED light source, which refers to various specific measures adopted to prevent the ignition of surrounding explosive mixtures. Explosion-proof LED lamps are the most energy-saving explosion-proof lamps so far, which are widely used in oil fields, chemical plants, petroleum, military and other places.
Some people will ask after purchasing explosion-proof LED lights: how to maintain explosion-proof LED lights? Today, I will talk with you about the points that should be paid attention to in the protection of explosion-proof LED lights.
1. To check the explosion-proof LED lights regularly, you should check whether the grounding fixture is grounded in the other parts of the ground connection.
2. Regularly clean the explosion-proof LED lights, and wipe the external dust with a dry rag to improve the light efficiency and heat dissipation performance of the lamps. Do not use wet rags. Turn off the power before cleaning.
3. If there is accumulated water in the lamp cavity of the lamp used in a humid environment, it should be protected in time, and the sealing parts should be replaced to ensure the protective function of the shell.
4. If the light source is damaged, turn off the light and notify the replacement in time, so as not to cause the electrical components such as the ballast to be in an abnormal state for a long time because the light source cannot be started.
5. Use a damp cloth before closing the cover. Do not wipe the light and transparent parts of the lamp lightly, so as to improve the light efficiency of the lamp. A thin layer of replacement anti-rust oil should be applied to the flameproof joint surface. When closing the cover, attention should be paid to sealing. Whether the ring plays a sealing role in its original position.
6. After opening the cover, check whether the flameproof joint surface is intact, whether the rubber seal becomes hard or sticky, whether the wire insulation layer is green and carbonized, and whether the insulating parts and electrical components have deformation and scorch marks. Problems should be repaired and replaced in time.
7. Check the transparent parts, whether there are any traces of impact by foreign objects, whether the protective net is loose, desoldered, corroded, etc. If there is, stop using it and repair and replace it in time.
8. The sealed part of the explosion-proof LED lamp should not be disassembled and opened frequently.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: https://www.benweilight.com/.
