Requirements for installation of high bay lights
Industrial and mining lamps are new technology products. When installing, the installer is required to be a certified professional electrician. In this way, it is possible to avoid damage to the high bay lights due to installation errors. There are the following requirements for the installation of high bay lights:
1. To check the integrity of the high bay light and complete accessories.
2. The wiring on the luminaire can pass through the drill hole and be fixed with a wire clip to the wiring behind the luminaire to ensure a firm fixation.
3. The power cord of the lamp must have enough length, free from tension or tangential force. Avoid excessive tension when installing the connection of the luminaire, and don't let the connection become knotted. Pay attention to the distinction between the output connections, and they should not be confused with other lamps.
4. The distance between the product and flammable materials should be at least 0.2m. The installed zenith has a gap of 2 cm. All lamps cannot be installed inside the zenith. Pay attention to separate low-voltage and high-voltage electrical connections. .
