Selection and use of thermal conductive glue for energy-saving industrial and mining lamps
At present, LED lighting can be said to be booming. The world is full of advertisements for energy-saving industrial and mining lamps and LED energy-saving lamps. Introduce how to save energy and how to last. However, energy-saving high bay lamps are still rarely used in school lighting systems. The LED lighting system of Tianjin Polytechnic University is also the world's largest semiconductor lighting demonstration project, and it is in a leading position in the world. Therefore, Tianjin Polytechnic University ranks among the world's four largest LED colleges and universities. There are more than 8000 LED lighting sources in the corridors and classrooms of the teaching building. There are 1500 LED lighting lamps all over the campus. The LED lighting lamps of roadsides, lakes, lawns, sports venues, and parking lots have become following incandescent lamps, fluorescent lamps, and high-pressure gas. The fourth-generation light source after the lamp. Led lamps can save 60%-70% of electricity consumption than traditional lamps, and the school district can save more than 1 million yuan in electricity bills a year. It can be seen that the use and development of energy-saving industrial and mining lamps need to be strengthened.
Selection of Thermal Conductive Adhesive for Energy-saving Industrial and Mining Lamps
With the development of society, the demand for energy-saving and emission-reducing green lighting is becoming stronger and stronger. The main products of green lighting are LED energy-saving lamps, energy-saving industrial and mining lamps and other products. But at present, the quality of LED products in China is uneven. One of its very important reasons is that the quality of the thermal conductive glue is not good, and the heat dissipation plate is not enough to dissipate heat, which leads to the low quality of the lamp. Attention should be paid to the selection of thermal conductive adhesive: adhesive thermal conductive adhesive should be used, which can improve the thermal conductivity of energy-saving industrial and mining lamps and increase the service life of the lamp; there are many choices in the selection of diffuser, each The advantages and disadvantages of each, most of the production of flat lights will choose a diffuser with a glossy surface and a matte surface, but this kind of light panel will generate a lot of static electricity during the process of use, and it will emit light in the air The dust is adsorbed on the lampshade or the lamp body, which affects the uniformity of light.
The energy-saving high bay lamp replaces the original traditional halogen lamp and has the characteristics of higher luminous brightness and stronger directivity. From the characteristics of energy-saving high bay lights, it can be seen that its trial is mainly for places with relatively high brightness requirements. The following is our company's summary of the main use places:
1. It is used by people working in tunnels or mines. It can be installed on hats and portable.
2. Large square, commercial lighting
3. Large conference rooms, shopping malls and other large indoor venues
4. Construction site
5. Factory buildings, large warehouses, etc.
In the past few years, China's energy-saving industrial and mining lamps and other led products are very popular in Europe and the United States, and the annual export volume is very huge. Many energy-saving industrial and mining lamp companies make a lot of money. But nowadays buyers in the international market are no longer just asking for photos
