Talking about the working principle and use of solar integrated street light
Principle:
During the day, solar panels generate power in the sun. Through the control function, the solar panels charge the battery and automatically turn on the LED lights at night (human body induction mode, reducing power consumption) to illuminate the road through the LED lights.
Composition:
It consists of an integrated lamp (built-in: high-efficiency photovoltaic module, large-capacity lithium battery, microcomputer MPPT intelligent controller, high-brightness LED light source) and a light pole.
Purpose:
Installed on various traffic roads, auxiliary roads, residential roads, courtyards, mining areas and places where electricity is not easy to pull, park lighting, parking lots, etc. to provide road lighting at night, and solar panels charge batteries to meet lighting.
Terms and Conditions:
●. "One light" work is not allowed to leave the sun. Please select the appropriate product model according to the sunshine intensity of the installation site or the total annual radiation of solar energy.
● "All-in-one lamp" chooses long-life lithium battery as energy storage element. During the day, the charging temperature is 0°C～+60°C. When it is lower than 0°C, the control system will automatically stop charging to protect the battery. When the temperature rises above zero, it will automatically charge (control system temperature control is optional) .The discharge condition of discharge at night is -20°C～+60°C, beyond this range, the battery performance will be destroyed. Please make sure that the extreme temperature does not exceed the above conditions when selecting "All-in-one light".
●The battery of the "all-in-one lamp" can be stored for up to 1-2 months after being fully charged. After a long period of transportation or storage, it needs to be inspected in time, charged and recorded regularly. Otherwise, the battery will be damaged.
● If it is in the northern hemisphere, when installing the "integrated light", make the solar panels face south as much as possible to obtain the maximum energy. If it is installed in the southern hemisphere, the solar panels face the north when installing. At the same time, it is necessary to avoid the shadows of obstacles such as houses, trees, etc., which will reduce the power generation efficiency of solar panels and cause the efficiency of the "integrated lamp" to decrease.
●. The cleanliness of the surface of the "all-in-one lamp" solar panel will also affect the power generation efficiency of the solar panel. Therefore, the surface (such as dust, leaves, oil stains, etc.) needs to be cleaned. It is recommended to scrub with ordinary detergents regularly.
●The lamp body is equipped with a fuse holder, please take out the insulating film in the fuse holder before use, you can use it, and a spare 5A (220V) fuse is also provided.
