What are the advantages of comparing t8led lamps with t5led lamps?
Replacing ordinary LED tubes with t8led fluorescent tubes can save about 60% of electricity. High light efficiency and smart LED fluorescent lamps save energy up to 85%
t8 adopts built-in power supply, which can be directly replaced, easy to install, in line with people's habits, greatly reducing the trouble of installation, using aluminum-plastic pipe, good heat dissipation, can be repeatedly repaired and used, environmental protection, and does not damage the environment.
The t5 split tube is thin and the heat dissipation is not good. At present, we have launched the t5 led fluorescent lamp with a diameter of 20-22. The power supply can be built in, and the heat dissipation is greatly improved. The t5 is integrated, and the heat dissipation is good.
Except for the difference in thickness, the integrated t8 and t5 have basically the same length and the same installation method. Because the tube bracket is integrated, the heat dissipation is very good.
The main difference between them is the diameter, although both are cylindrical. t8 diameter 26mm t5 diameter 16mm
There is also a difference in length. Generally speaking, the length of the t8 tube is longer than that of the t5led tube. For example, it is also 1.2 meters in length. In the case of excluding pins, the length of t8 1.2 meters is 1198, while t51. The length of 2 meters is 1149, the difference is still a little big. It must be noted. Because the mounting bracket is matched with the lamp, they cannot be easily replaced.
The advantage of t8 is that it can make LED fluorescent lamps with more functions. For example, like radar-sensing LED fluorescent lamps and infrared-sensing LED tubes, these two types can only be made by t8 tubes, and the t5 tubes are too thin, and the sensor head is installed However, there is also a way to achieve it, that is to use t8 to t5 lamps. The purpose is to use t8 tubes, t5 lengths, t8 plugs, and 5mm pins. It can be achieved. The bracket can also be installed.
The advantage of the t5led lamp is that it is small, easy to install in a small space, and does not take up space. It should be noted that for its good heat dissipation, it is better to make the power smaller. If high brightness is required, then we recommend high light efficiency. At the same time, the power supply should be externally installed to reduce the interference of the heat source on the lamp tube. The method of high light efficiency is more particular. First, the brightness of a single LED lamp bead should be high, and the number will increase. Second, the lamp bead The voltage should be lower, the third is that the power supply efficiency should be high, the fourth is that the PC cover should have better light transmission and many other reasons to meet the requirements of high light efficiency. It needs to be tested and calculated repeatedly. Generally, professional manufacturers can do it. .
It is recommended to give priority to the renovation project of replacing LED lamps with t8 led fluorescent tubes, which has greater energy-saving benefits. At the same time, pay attention to the selection of heavier aluminum materials as much as possible, which is of great help to heat dissipation.
With the development of LED lighting technology in recent years, the technology of using LED lamps to replace t5/t8 lamps has been widely adopted in underground parking lot energy-saving renovation projects. The intelligent led lamps of the controller can realize the automatic induction of lamps and lanterns, the lights will be turned on when people come, and they will turn dark when people go. It is the best solution for energy saving of underground parking lot lighting. Installation of such products can achieve energy savings of 80% to 90%. www.ledlongtech.com
The advantages of t8/t5 led lamps are in common, energy saving, environmental protection, long service life, large irradiation area, and generally low power, but the use effect is good. Compared with other led lamps, the advantages are still obvious. Cheap and high luminous efficiency. Suitable for places with large areas of lighting
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
