What's the matter with LED tube temperature and dead light?
1. The conversion relationship between the aluminum material of the LED tube and the power of the whole lamp is based on the premise that the aluminum substrate and the radiator are in good contact, and whether the back of the aluminum substrate of the LED tube is coated with thermal grease or Silicone and its thermal conductivity really affect the heat dissipation effect of the LED lamp beads. The narrow plate with a width of 9.6mm is generally used by LED lamp manufacturers directly without applying thermal silica gel/grease. If the aluminum substrate is slightly deformed , If the contact is not good, the lamp will die, and the dark spot of the led wick will appear. It is made of silica gel carbonized by high temperature roasting.
2. In the past, there have been customer complaints about the failure of the varistor of the led tube, and the inductive ballast should be removed. Only the starter is removed. There will still be induced current when the power switch is turned off, which will cause the varistor to fail may
3. The plastic shell and the glass shell are cheating... it's just an illusion that the outside is not hot. The internal temperature is actually very high, which is extremely detrimental to the LED lamp beads.
