1. Keep an eye on the power level
We should know how much power it has left before we use it. This is because solar street lights give off different amounts of power at different times. When we buy one, we should make sure we know how much power it has and whether it meets national standards. When we buy something, we also need to check the product's certificate to make sure we don't get a bad one.
2. Check how much power the battery has.
Before we use the solar street light, we need to know how big the battery is on it. Solar street lights should have batteries that are the right size-neither too big nor too small. When the battery is used every day, it may waste energy if the size is too big. In the evening, if the battery capacity is too low, the lighting effect will not be perfect, and it will cause a lot of trouble for people.
3. Take a look at the battery's box.
When we buy solar street lights, we should also think about how the batteries are packed. Once the solar street light is set up, the battery needs to be sealed and a mask should be worn outside. This will not only lower the battery's total power but also make the light look better.
How do we make street lights that use the sun?
First, find a place to install the fixtures that is well lit, dig a hole for the base there, and then install the fixtures.
Second, make sure that the lights and their parts are full and whole. Put together the lamp head parts and change the solar panel's angle.
This is the last step. Put the lamp head and pole together and put the pole in place.
