4 installation solutions for LED panel lights
LED panel light, also known as LED panel light, as the name suggests, its luminous surface is in the form of plane, beautiful and elegant, and can be integrated with the wall and ceiling.
As a professional LED panel light manufacturer, BENWEI LED panel light will introduce 4 common installation methods for LED panel light below.
You can choose different installation methods to install LED panel lights according to your own situation.
Tools and materials needed to install led panel lights and LED panel lamps: led panel lights, led light conversion frames, hanging wires, utility knives, markers.
Note: LED panel lights have matching drivers, please be sure to install them together with the matching drivers when installing.
LED panel light installation method 1:
The first is the easiest way to install LED panel lights.
Installation step 1: First remove a piece of ceiling, the area of the removed ceiling panel is smaller than the LED panel light you want to install.
Installation step 2: Put the driver of the LED panel light on the ceiling next to it, then connect the power cord of the driver, and finally place the LED panel light.
The installation method of this LED panel light is very simple, and it is usually used in offices and other places.
LED panel light installation method two:
The second method is to use the surface-mounted method to install the LED panel light.
Installation Step 1: First, use a screwdriver to tighten the nut on the LED panel light or LED panel light conversion frame, and fix it firmly on the cement ceiling.
Installation step 2: Connect the LED panel light, the drive and power cord of the LED panel light, and fix the drive and connecting line.
Installation step 3: Press the LED panel light and LED panel light into the installed conversion frame, pay attention to pressing hard, the LED panel light must be completely embedded in the conversion frame.
LED panel light installation method three:
The third method is to use the concealed method to install the LED panel light.
Concealed installation method of LED panel light:
Installation steps 1. First, take out the marker pen prepared in advance, and use the marker pen to draw the exact size of the inner edge of the LED panel light conversion frame.
Installation step 2. Use a utility knife to cut according to the line drawn by the marker. Be careful not to scratch yourself when cutting.
Installation step 3. Firmly install the cut clean LED panel light conversion frame on the ceiling.
Installation step 4. Put the driver of the clean LED panel light in the ceiling, and install the drive power of the LED panel light.
Installation step 5. Finally, insert the clean LED panel light into the installed conversion frame to complete the installation.
LED panel light installation method four:
The fourth method is to use the hoisting method to install the LED panel light.
The hoisting method of clean LED panel light:
Installation steps 1. To install the LED panel light by hoisting, you need to use a hanging wire. First of all, the base of the 4 hanging wires should be firmly fixed on the sky in the house.
2. Insert the installed 4 hanging wires into the clean LED panel light respectively, and they must be installed firmly.
3. Then pull the steel wire and adjust the height of the LED panel light to a suitable position.
4. Install the driver and power cord, fix the driver power cord, and the installation is complete.
The above content is the installation method of several LED panel lights introduced to you as a professional LED panel light manufacturer.
You can choose the installation plan that suits you according to your own decoration situation. Some installation methods are easier said than done, you should choose a high-quality LED panel light in advance, so as to avoid the easy damage of the LED panel light and lead to re-installation and replacement of purification lamps.
