Classification of Led industrial and mining lamps and the characteristics of LED industrial and mining light sources
Industrial and mining lamps are lamps used in the production and operation areas of factories and mines. In addition to various lighting lamps used in general environments, industrial and mining lamps also include explosion-proof lamps and anti-corrosion lamps used in special environments. Some large high-rise buildings.
According to the bright function, it can be divided into general lighting and partial lighting.
General lighting lamps are generally evenly placed on the top or side walls of the work site to illuminate the entire work surface. It is necessary to use high-power incandescent lamps, tungsten halogen lamps, led high bay lamps, high-intensity gas discharge lamps or a large number of fluorescent lamps. Of course , There are more energy-saving high-power LED industrial and mining lamps, most of the industrial and mining lamps belong to this category, general lighting has higher requirements for the distribution of light, and two types of direct lighting and semi-direct lighting are widely used. Light distribution, especially for the latter, a part of the semi-direct lighting type that announces upward light illuminates the ceiling, which can add ceiling brightness to create a more comfortable and brighter environment.
Part of the lighting lamp is a kind of lamps that improve the illuminance of a certain working part. Its function can be to strengthen the lighting on the basis of the general lighting of the LED high bay lamp manufacturer to compensate for the lighting. It can also be used in some places where lighting is not normally required (such as equipment Inspection and maintenance places) are used as temporary lighting, and most of them have no strict rules on their light distribution. Some lighting lamps are generally installed near the work area to use incandescent lamps with safe extra-low voltage (≤50V, communication effective value), tungsten halogen lamps As the light source, there are (hand-held) running lights, hanging lights, work desk lamps, machine tool work lights, etc. In some tall factories, sometimes spotlights are used for partial lighting.
1. The price of led industrial and mining lamps. The price of led industrial and mining lamps is more expensive. Compared with incandescent lamps, the price of a few LEDs can be equivalent to the price of an incandescent lamp. Generally, each group of signal lamps needs to be It is composed of 300-500 diodes.
2. LED high bay lamp voltage: LED energy-saving lamps use low-voltage power supply, the power supply voltage is between 6-24V, depending on the product, so it is a safer power supply than the use of high-voltage power supply, especially suitable for public places.
3. The response time of led high bay lights: the wholesale response time of its incandescent led high bay lights is milliseconds, and the response time of LED energy-saving lamps is nanoseconds.
4. Led high bay lamp efficiency: energy consumption is reduced by 80% compared with incandescent lamps with the same luminous efficiency.
5. Stability of led high bay light: 100,000 hours, the light decay is 50% of the initial.
6. Applicability of led high bay lights: small, each unit LED chip is 3-5mm square, so it can be prepared into various shapes of devices, and suitable for variable environments.
7. Environmental pollution caused by led industrial and mining lamps: no harmful metal mercury.
Benwei Light focuses on the R&D, production and sales of LED industrial lighting products. At the beginning of its establishment, Camry Optoelectronics used LED industrial lighting radiators (including: LED high bay light profiles and phase change radiators, LED floodlight die-casting kits, LED tunnel light profiles and die-casting kits and other radiators and related kits) The main direction of R&D, production and sales. We have accumulated valuable experience and advanced production technology in the production of radiators and kits. Beginning in 2011, on the basis of heat sinks and housing kits, the company has expanded its production lines and increased the R&D, production and sales of LED industrial lighting products, further improving the company's products. The company’s production plant is expanded to 4000 square meters, equipped with advanced optical laboratory (IES test report), light source color test, waterproof test, high pressure test and a large number of advanced instrument testing equipment, providing strong technical support to ensure product quality ! The company has passed ISO9001: 2008 quality management system certification, and its products have passed ETL, DLC, SAA, TUV, CB and other certifications. The products are sold in more than 100 countries and regions overseas! At present, the company is unswervingly taking the road of independent research and development, and repaying the support of our customers with better products and more cost-effective products! At the same time, we are also looking forward to establishing mutually beneficial and win-win cooperation with more new customers!
