What to pay attention to before and after installing high bay lights
We have already briefly explained the product advantages of LED high bay lights before. Let’s take a look at the relevant descriptions about where the energy-saving advantages of LED high bay lights are mainly reflected.
The price of LED high bay lights is higher and better. The led high bay lamp has certain advantages in light efficiency, and the ability to convert electrical energy into light energy is better than other traditional light sources. The directionality of led high bay lights is one of the important features. The structure of led industrial and mining lamps is different from other light sources. Its light has a certain directionality, and it is impossible to emit light around. The LED concentrates the light on the illuminated surface, which naturally improves the efficiency.
Through the analysis of the above two aspects, we can know that compared to other types of products, led industrial and mining lamps have certain advantages in use, especially in terms of energy saving. The above is the relevant description about the energy-saving advantages of led high bay lights, remember to pay attention to our website to learn more.
Although high-power high-bay lamps are also a type of high-bay lamps, it does not make any difference whether they are installed or not. Today we will take a look at the installation points of high-power high-bay lamps.
At the position where the high bay light needs to be installed, set the hook in advance. It should be noted that the hook must be used in conjunction with the hoisting ring, and the load-bearing capacity must exceed 30Kg when installing the hook. And do a good job of waterproofing and insulation; turn on the power after installation, and observe whether the high bay light can work normally. The main points of the installation of high-power industrial and mining lamps are as follows:
1. Tighten the lifting ring, the lifting ring is M20 thread.
2. Put the lifting ring into the hook and place it steadily.
3. Pay attention to the working environment temperature and store.
4. When installing the lamps, the wiring and wiring are sealed to prevent leakage.
5. When the external power line is connected, corresponding waterproof and leak-proof measures need to be taken.
6. When the lamps are used, they must not violate the fire protection regulations.
7. For installation, please find a professional electrician to connect the red wire with a 0.75mm2 three-core cable, which is the so-called live wire, the blue wire is the neutral wire, and the yellow wire is the ground wire.
High bay lights are classified as industrial electronic products, so they also need to be installed in designated locations. Before installation, it is necessary to check the integrity of the high bay lights and the completeness of the accessories. The wire on the high bay light can pass through the drill hole and the wire behind the lamp can be fixed with a wire clamp, and the fixing must be strong. When installing high bay lights, it is necessary to require the installation personnel to hold a professional electrician license, so as to prevent the installation errors from damaging the high bay lights.
After the high bay light installation is completed, a power-on test is required. If a single high bay light fails to light up, it is necessary to troubleshoot the circuit or the high bay light problem. After ensuring that all high bay lights are normally lit, the high bay light installation operation is considered to be completed. It is necessary to ensure that the power cord of the industrial and mining lamp has a sufficient length, not to be subjected to the tension or tangential force of the pneumatic ball valve, and to prevent excessive tension when installing the connection of the industrial and mining lamp, do not make the connection knot, and pay attention to the difference in the output connection. Do not mix with other lamps.
