Energy-saving sensor switch and parking lot LED double-bright sensor smart light
Energy-saving sensor switch: an automatic control product based on infrared technology or radar sensor technology. When someone enters the sensor range of the switch,
The switch automatically turns on the load, and the person does not leave the sensing range, the switch will continue to turn on; after the person leaves, the switch automatically turns off the load after a delay. People arrive
The lights are on, people leave the lights off, friendly and convenient, intelligent induction, safe and energy-saving.
Infrared sensor switch: It uses far-infrared sensor to detect the infrared rays emitted by the human body for comparison operation, and automatically controls the lighting of the lamps.
Off; At the same time, the lamp's turn-on time is set through the imported chip, which realizes intelligent control and energy saving. Can not penetrate glass doors, wooden doors, walls.
Sensing range: 120 degree cone angle, within 5-8 meters; delay time: adjustable.
Radar sensor switch: also known as microwave sensor switch, based on the Doppler effect, using the most advanced planar antenna, which can be effective
Suppress the interference of high-order harmonics and other clutter, high sensitivity (penetrate wooden doors, glass doors, thin walls), strong reliability, wide sensing range, intelligent energy saving, it is the first choice for building intelligence and modern property management. Delay time: adjustable; sensing distance: 4-10 meters (adjustable); sensing angle: 180*360 degrees, front hemisphere.
Comparison of radar sensor switch and infrared sensor switch: radar switch has longer sensing distance, wide angle, no dead zone, and can penetrate glass and thin
Wooden boards; according to different powers, it can penetrate walls of different thicknesses; it is not affected by environment, temperature, dust, etc.; at 37 degrees, it feels
The distance should not be shortened.
Application range of induction switch: energy-saving automatic lighting places such as corridors, corridors, bathrooms, basements, garages, warehouses, classrooms, etc.
According to different places and lamps, some infrared sensor switches are effective, and some radar sensors are effective.
We can provide samples for testing and provide different customers with the best energy-saving induction intelligent control solutions.
Install inductive switches, generally energy saving can reach 40%-90%. The high-power inductive switch can drive the exhaust fan and fan linkage.
For parking lots: At present, most underground garage lighting mainly uses energy-saving lamps and zone control to reduce energy consumption, but it also brings some inconvenience to car owners during use. The garage lighting is dim". In the face of the energy consumption of underground garage lighting and the safety lighting needs of owners, how to achieve both energy-saving lighting and humanized services is one of the problems faced by many companies that manage parking lots. Annuo underground parking lot intelligent LED garage lights adopt advanced LED light source and independent intelligent control technology, which can provide sufficient lighting for car owners to drive in and out of the underground garage quickly and safely. When there are no vehicles coming in or out, it will automatically switch to the power-saving lighting state to provide a certain amount of lighting for monitoring. Long-term operation power consumption is only equivalent to 10% of traditional lighting, and underground garage lighting has a power-saving effect of more than 90%, so as to achieve the effect of "lights on and power-saving".
LED induction lamp with double bright effect: The dark underground garage can easily make people (especially women) fear and panic. The bright light can make people feel safe. In garages equipped with Anno smart underground garage lights, when the owner is looking for a car in the underground parking lot, the nearby smart lights can provide high-brightness lighting, and the distant lights can provide certain visual lighting. If there is a bad person's activity, then the lights near the bad person will suddenly brighten, so as to remind the car owner, and also allow the monitoring to capture a clear image. Anno garage lights take care of the safety of cars and people.
When a vehicle enters and exits, the infrared sensor in the corresponding area sends a signal, and the dormant LED light is awakened to light up. The power is 16W, and the brightness reaches the brightness of 40W ordinary fluorescent light, which is convenient for car owners to stop. When the car or people move in the sensing area, the LED fluorescent light It always keeps on. When the car or person leaves the sensing area for about 30 seconds (adjustable), the LED light will automatically re-enter the dormant state with a power of 3w.
Features of parking lot LED induction smart lights: high power saving rate. Under the same illumination conditions, the power consumption of LED energy-saving lamps is one-tenth that of incandescent lamps and one-half of fluorescent lamps. After operating the LED sensor smart lights in underground parking lots, the power consumption can be reduced by about two-thirds. Carrying out the energy-saving transformation of underground garage lighting can not only enable the management company to greatly reduce the power consumption of parking lot lighting and reduce the company's operating costs, but also highlight the humanized characteristics of lighting and enhance the image of real estate (property). Under normal circumstances, the cost can be recovered in about 10 months with the replacement and transformation of Anno smart LED tubes.
Each underground garage with 500 lights can save 150,000 kWh of electricity per year for underground garage lighting.
The energy-saving lighting transformation of an underground garage with 1,000 500 lamps can save 150 million kilowatt-hours of electricity each year, save 63 million kilograms of standard coal, and reduce CO2 emissions by 1.77 billion kilowatts.
