1. Load problem of thyristor dimmer?
The load of LED dimmer varies with LED dimmer and light source. Derating should be considered to adapt to spikes caused by drivers. Typical
The derating percentage of the dimmer shall be 25% - 30% of the rated load of the dimmer.
2. The actual transmission distance of 0-10V signal?
And the signal line path, material, power signal current, power quantity are related. For example, 1.5mm 2 copper wire is connected to the oches dimming power supply,
The transmission distance is 500m, and the voltage drop is less than 0.1V.
3. Dali debugging site can not find the lamp address?
Check whether the signal line is in good condition, and ensure that the number of system power supply does not exceed 64, and the bus power supply capacity is insufficient.
4. If the 0-10V power supply signal line is reversed, will it be damaged?
No, the power will be on or off for a long time.
