How does the infrared sensor LED tube work?
The lights are on when people arrive, and the lights are off when people leave. It is cordial and convenient, safe and energy-saving!
With the continuous progress of society, we have higher requirements for the environment in which we live. Whenever you walk into a larger living area at night or walk into the corridors of residents’ accommodation, you will find that although all corridors are installed There are lamps, but the corridors are often dark, which makes our actions very inconvenient.
The main reasons for this situation are:
1. The quality of some lighting lamps and control switches is not good enough, and the service life is short.
2. The lamps are installed in the corridor, which is inconvenient to replace, which leads to untimely replacement and inability to provide a lighting environment.
3. The voltage in the living area in different areas is unstable, and the voltage can be as high as 250V in the middle of the night, which directly increases the power greatly and greatly reduces the service life of the lamp. Faced with so many problems, if we do not improve, our living environment may often be dark.
With the rapid development of the LED industry, many alternative lamps have sprung up on the market. However, the development of the LED industry is too rapid and far exceeds the market demand, which has caused an oversupply in the market. Faced with these problems, we chose an unusual way of intelligent lighting. In 2011, when the tide of bankruptcies swarmed, but calmly developed and produced infrared induction LED tubes and LED microwave induction ceiling lamps with independent intellectual property rights, and these two smart lights were aimed at lighting corridors and underground parking lots. , Are two market segment products, and these two series of products are also an important step in the road of intelligent lighting. The birth of this product is a good solution to the often darkened corridors in the living quarters mentioned above.
Working principle: Infrared induction is a passive human body detector, which automatically controls the lamps by detecting the brightness of the surrounding environment and the movement of the human body, so that the quietness will not disturb the rest of others. At night: when someone moves in the detection range, the switch is turned on and the person leaves the detection range, the switch goes out after a delay of tens of seconds; during the day: the outdoor light is strong during the day, and the lamp is completely off and does not light up. This greatly facilitates the control and management of lamps in various public places, and achieves the best energy-saving purpose
