How to choose the material of LED tri-proof light
LED tri-proof lights are generally used in places with strong corrosive, dusty, and rainy industrial lighting needs, such as power plants, steel, petrochemicals, ships, venues, parking lots, basements, etc. This requires the material of the LED tri-proof light to be very good. Let's see how to distinguish the material of the LED tri-proof light.
1: See if there is a national inspection report;
Two: Look at the packaging of the product, including
the product's trademark, nominal power, and the content of the mark, wipe it with a soft damp cloth, and the clear and easy-to-read mark should be qualified;
LED tri-proof light
Three: Qualified energy-saving lamps can be used normally for 5,000 hours in the experimental state, and reach more than 2,000 hours. If this standard is not met, that is, lemon;
4: Safety requirements, installation, removal process, please refer to whether the cap is loose, whether there is a tilted head, and whether it is insulated
General attention should be paid to: one, buy those products that have passed the safety certification and the national green lighting project recommended products, do not buy three products; two, visual inspection, please note that the lamp and the casing are loose, the phosphor is uniform, with or without particles When present, the thickness of the LED tri-proof light should not change too much. A good product also needs to be used correctly to prolong its life. Manufacturers should ensure that any protective safety compliance, light readiness to a certain level, an average lifespan of more than 8,000 hours, and labelling issues are preceded by some quality assurance. Also consider the technical parameters of the electronic ballast.
