How to clean the dirty LED purification lamp?
The lamp body of the LED purification lamp (LED clean lamp) has been professionally dust-proof, and the surface is smooth and not stained with dust. Generally speaking, even if it is stained with some dirt, it can be cleaned very easily. However, if the indoor space is relatively dirty, such as the factory production workshop, or the cleanliness of the lighting environment is relatively high, such as use as clean room lights, clean room lights, food factory lights, etc.
In these special places, after long-term use of purification lamps, the surface of purification lamps and cleaning lamps may be contaminated with traces of dust and dirt. At this time, it is necessary to clean LED purification lamps. So how to clean LED purification lights and LED clean lights safely and quickly? Today, LED panel light manufacturers provide you with some cleaning methods for LED purification lights.
1. Before cleaning the purification lamp and the cleaning lamp, the power supply of the purification lamp must be disconnected, and then use a damp cloth to wipe the purification lamp, or simply wash the purification lamp with soap, weak detergent or warm water.
2. The location of the trademark logo and film on the lamp body of the LED purification lamp (LED clean lamp) needs to be paid attention to. It is best to use warm water and weak detergent to wash.
3. If the surface of the LED purification lamp (LED cleaning lamp) is polluted by grease, oil stains, etc., you can first use a soft cotton cloth to wipe off the stains, and then use neutral detergent or special detergent for cleaning , and finally wipe the LED purification lamp clean.
4. The surface of the LED purification lamp (LED cleaning lamp) has bleach and various acids attached to the surface of the lamp body. Immediately rinse with water, then soak the lamp with ammonia solution or neutral carbonated soda solution, and wash with neutral detergent or warm water. LED clean light.
5. If there is a rainbow pattern on the surface of the purification lamp, it is due to excessive use of detergent or oil pollution. In this case, the LED cleaning lamp can be cleaned with warm water and neutral detergent.
6. If the surface of the purification lamp is stained by dirt, it can be cleaned with 10% nitric acid or abrasive detergent, or special cleaning chemicals can be used to clean and wash the LED purification lamp.
Matters needing attention: After cleaning the LED purification lamp with water, be sure to wipe off the water stains. It is strictly forbidden to connect the driving power of the purification lamp without wiping the water stains on the lamp body.
Mingyang, as a professional and technologically leading purification lamp manufacturer, LED purification lamp is a high-quality high-end purification lamp brand. Although the purification lamp reaches IP62 waterproof capability, after long-term use, LED purification lamp may inevitably exist due to environmental damage, Minor line damage caused by man-made, external force and other factors. If there are water stains on the LED clean light at the same time, under certain conditions, it may cause a short circuit hazard. As a precaution, it is best to wipe the lamp body of the LED purification lamp clean before passing through.
